General Specifications As Per Brochure Max. Pressure: 100 Bar 1500 PSI Coolant Volume: Automatically Variable Volume 24 - 120 Liters / Minute 6 - 32 GPM Tank: 480 Liter / 126 Gallon Filtration: Dual Parallel Bags Outlets: 2 The WV2-120 can operate as two completely independent 60 liter (16 gpm) modules or combine to give you high pressure AND very high volume (120 liters) to one outlet at any time during the same program! Standard Configuration: The ChipBLASTER WV2-120 is fed by a transfer pump that draws from the machine tool sump, through the filter vessel to the integral 480 liter (126 gal) tank. When the machine tool calls for coolant, the filter pump(s) draws the coolant from the ChipBLASTER tank and pumps through the post (safety) filter to the inlet of the positive displacement pump. The coolant then flows at high pressure through a series of distribution and safety valves and on to the machine tool. M Code Requirement: 1 "M" Code Controlled Signal is Required to Operate as One High Volume Outlet. 2 "M" Code Controlled Signals Are Required to Operate as Two Independent Modules. 3 "M" Code Controlled Signals Are Required to Operate as Two Independent Modules AND One High Volume Outlet 24 VDC,110 VAC or 240 VAC signal is acceptable needed. Required Electrical Power: 82 amps, 230 VAC, 3 Phase, 60 Hz 41 amps, 460 VAC, 3 Phase, 60 Hz 49 amps, 400 VAC, 3 Phase, 50 Hz Ideal for Machine Tools Up to 60 Kw (80 HP), Dual Turret Lathes & 50 Taper Mills. See brochure for more details and options.
to complete inventory display
to our home page