General Specifications As Per Brochure Max. Pressure: 100 Bar 1500 PSI Coolant Volume: Automatically Variable 24 - 120 Liters / Minute 9 - 31.5 GPM Tank: 480 Liter / 126 Gallon Filtration: Dual Parallel Bags Outlets: 3 The GV3-120 can operate as three completely independent 40 liter (10.5gpm) modules or combine to give you high pressure AND very high volume (120 liters) to one outlet at any time during the same program! Standard Configuration: The ChipBLASTER GV3-120 is fed by a transfer pump that draws from the machine tool sump, through the filter vessel to the integral 480 liter (126 gal) tank. When the machine tool calls for coolant, the filter pump(s) draws the coolant from the ChipBLASTER tank and pumps through the post (safety) filter to the inlet of the positive displacement pump. The coolant then flows at high pressure through a series of distribution and safety valves and on to the machine tool. M Code Requirement: 1 "M" Code Controlled Signal is Required to Operate as One High Volume Outlet. 3 "M" Code Controlled Signals are Required to Operate as Three Independent Modules 4 "M" Code Controlled Signals are Required to Operate as Three Independent Modules AND One High Volume Outlet * If your machine uses pulsed M Codes, please contact ChipBLASTER. Required Electrical Power: 82 amps, 230 VAC, 3 Phase, 60 Hz 41 amps, 460 VAC, 3 Phase, 60 Hz 49 amps, 400 VAC, 3 Phase, 50 Hz Ideal for Machine Tools Up to 60 Kw (80 HP), Dual Turret Lathes & 50 Taper Mills. See brochure for more information and options.
to complete inventory display
to our home page