General Specifications As Per Brochure Pressure: 1500 PSI Coolant Volume: Automatically Variable 3 - 10.5 GPM Tank: 100 Gallon Filtration: Dual Parallel Bags Outlets: 2 The GV2-80 can operate as two completely independent 40 liter (10.5 gpm) modules or combine to give you high pressure AND very high volume (80 liters) to one outlet at any time during the same program! Standard Configuration: The ChipBLASTER GV2-80 is fed by a transfer pump that draws from the machine tool sump, through the filter vessel to the integral 380 liter (100 gal) tank. When the machine tool calls for coolant, the filter pump(s) draws the coolant from the ChipBLASTER tank and pumps through the post (safety) filter to the inlet of the positive displacement pump. The coolant then flows at high pressure through a series of distribution and safety valves and on to the machine tool. M Code Requirement: 1 "M" code controlled signal is required to operate as one high volume outlet. 2 "M" code controlled signals are required to operate as two independent modules. 3 "M" code controlled signals are required to operate as two independent modules AND one high volume outlet. **24 VDC,110 VAC or 240 VAC latching signal is acceptable . Required Electrical Power: 64 amps, 230 VAC, 3 Phase, 60 Hz 32 amps, 460 VAC, 3 Phase, 60 Hz 49 amps, 400 VAC, 3 Phase, 50 Hz Ideal for Machine Tools Up to 50 HP, Dual Turret Lathes & 50 Taper Mills See brochures for more details and options.
to complete inventory display
to our home page