General Specifications per Brochure: Bar Size Capacity: 2mm (.08") - 23mm (.906") Bar Length Capacity: 12' Maximum Bar Length: 12' 2" Minimum Bar Length: 63" (15.75" available option) Magazine Capacity: 40 bars up to .25" diameter, 16 bars up to .787" diameter. Maximum Remnant Length: 15.75" Operating Voltage: 230V AC 3 Phase (400V available) Control Voltage: 24 Volts DC Total Power Required: 2.5 kVA/1.8 kW Compressed Air Required: 90 psi, 10 cfm Guide Channel Oil: ISO FD10, quantity 15 gal. (not incl.) Feeding Speed: 39"/sec (Adjustable) Facing Accuracy: +/- .008" Bar Change Time: 19 seconds for 12' bar Bar Straightness Required: .007"/foot Bar Feeder Shipping Weight: 1500 lbs. Color: RAL 5002 Blue, RAL 7035 Light Gray Standard Equipment Includes: Custom Electrical Cable Package & Interface Kit Remnant Retract Walking Beam & Gravity Type Mag. both included Synchronization Device Guide Channel Set includes 1 bar pusher, 1 nose, 1 rotating tip, 1 collet Options (prices subject to cahnge without notice) PACKAGE A Elite 220/12 with two (2) complete guide channel sets which includes 2 bar pushers, 2 rotating tips, 2 collets, 2 noses and 1 spindle liner: $ 35,900.00 PACKAGE B Elite 220/12 with three (3) complete guide channel sets which includes 3 bar pushers, 3 rotating tips, 3 collets, 3 noses and 2 spindle liners: $ 37,500.00 Iemca's Tool Box $ 1,800.00 Category III Interface: $ 1,400.00 Special Adaptation Kit: $ 1,600.00 Anti-Vibration Device: $ 1,600.00 (Recc for Bushing-less Swiss with with a spindle bore less than 32mm, lathe headstock stroke exceeding a 6" Stroke and when running "soft" materials) IEMCA/Bucci USA Installation: $ 3,100.00 Includes labor, travel expenses and 12 month warranty Important Notes: Bar Feeder installation does not include lathe-side software or hardware for magazine bar feeder interface. This interface must be supplied and installed by the lathe OEM or Distributor, prior to bar feeder installation. Maximum Bar diameters are for front ejection of the remnant. For remnant retraction, maximum diameters are slightly less. Bar straightness, proper guide channel selection, correct alignment and anchoring of bar feeder will ensure optimum performance at maximum rpm.
to complete inventory display
to our home page