When the symbol appears you may click on it for a picture and/or detailed specifications. The number enclosed in [] is our stock number.

For a quote or more information on the items shown, check the box at the start of the line and fill in your contact information at the bottom of the screen.

0A2450   AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE
  132 CFM, 175 PSI, QUINCY, No. QGB-30, 30 HP, 2006, immediately avail [391087]
  166 CFM, 125 PSI, Sullivan Palatek, 40 DP, 40 HP, Air Dryer [404439]
  172 CFM, 150 PSI, KOBELCO, No. KNW AO-A/H, 50 HP, 1996, Rotary Screw [390849]
  587 CFM, 125 PSI, SULLAIR #LS200SH125, 125 HP, 2014, AC Dryer [399702]

0A7550   AUTOMATIC SCREW MACHINE ACCESSORIES, TOOLING, PART
  Citizen A20VII, Chip Pan, 2 Available, $250 ea [401793]
  CITIZEN, ADS-310, Double Drill Sleeve, 1" x 60mm Shank, ER16 [287168]
CITIZEN, ADS-310, Double Drill Sleeve, 1" x 60mm Shank, ER16 [287721]
CITIZEN, ADS-410, Drill Sleeve, 1" Dia. x 80mm, ER16 [287717]
  CITIZEN, ADT-313L, FIXED BIT & SLEEVE FOR BW ON F20/F25/G32 [69030]
  CITIZEN, ADT-316L, FIXED BIT & SLEEVE FOR BW ON F20/F25/G32 [69033]
  CITIZEN ASC-110 Rotary Cross Drill for F20/F25 [338530]
  CITIZEN #ASC-206 ROTARY CROSS DRILLING SPINDLE FOR F20/F25 [292934]
  CITIZEN #ASC-206 ROTARY CROSS DRILLING SPINDLE FOR F20/F25 [292935]
  CITIZEN #ASC-206 ROTARY CROSS DRILLING SPINDLE FOR F20/F25 [292936]
  CITIZEN ASE-206, END/FACE DRILL FOR BACKWORKING FOR F20/25 [292940]
  CITIZEN ASE-206, END/FACE DRILL FOR BACKWORKING FOR F20/25 [292941]
  CITIZEN ASE-206, END/FACE DRILL FOR BACKWORKING FOR F20/25 [292942]
CITIZEN ASE-110 Rotary Face/End Drill SPINDLE FOR F20/F25 [292933]
  CITIZEN, ASM-106, Milling Spindle, Turret II for F20/25 [76317]
  CITIZEN, ASM-206, Rotary Cross Milling Spindle for F20/F25 [81746]
  CITIZEN, ASM-206, Rotary Cross Milling Spindle for F20/F25 [81747]
  CITIZEN, ASM-806, ROTARY CROSS MILLING SPINDLE, ADJUSTABLE F20/25 [75281]
  CITIZEN, ASM-806, ROTARY CROSS MILLING SPINDLE, "AS-IS" ADJUSTABLE F20/25 [75284]
  CITIZEN, ASM-806, Rotary Cross Milling Spindle, "AS-IS" Adjustable F20/25 [75285]
  CITIZEN, AST-206, Rotary Cross Tapping Spindle for F20/F25 [338532]
CITIZEN ATF-216L Fixed Turning Holder, for reverse, 5/8" x 5/8" for F20/F25/G32 [340929]
  CITIZEN ATF-216L Fixed Turning Holder reverse, 5/8x5/8" for F20/F25/G25/G33 [338527]
  CITIZEN, ATF-516L, FIXED BIT HOLDER FOR F20/F25/G32 [69037]
  CITIZEN, ATF-516L, FIXED BIT HOLDER FOR F20/F25/G32 [69038]
  CITIZEN, ATF-713L, FIXED BIT HOLDER FOR F20/F25/G32 [69043]
  CITIZEN, AUS-106L, Die Sleeve, 1" Dia. x 80mm L for 1/4" (3/4") [287710]
  CITIZEN, AUS-106L, Die Sleeve, 1" Dia. x 80mm L for 1/4" (3/4") [287711]
  CITIZEN, AUS-110L, Die Sleeve, 1" Dia. x 80mm L for 5/16" (1") [287712]
  CITIZEN, AUS-110L, Die Sleeve, 1" Dia. x 80mm L for 5/16" (1") [287713]
  CITIZEN, AUS-112L, Die Sleeve, 1" Dia. x 80mm L for 25/64" (1 1/2") [287708]
  CITIZEN, AUS-112L, Die Sleeve, 1" Dia. x 80mm L for 25/64" (1 1/2") [287709]
  Citizen CDF-4001L, Coolant Fed Double ID Holder, 1" Bore, for M20/32 [404295]
  Citizen CDF-4001L, Coolant Fed Double ID Holder, 1" Bore for M20/32 [404296]
  Citizen CDF-4001L, Coolant Fed Double ID Holder, 1" Bore for M20/32 [404485]
  Citizen CDF-4001L, Coolant Fed Double ID Holder, 1" Bore for M20/32 [404486]
  Citizen CDF-401L, Double Bore ID Tool Holder, 1" Dia. for M20/32 [404301]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404297]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404298]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404299]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404300]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404335]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404336]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404337]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404338]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404339]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404340]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404341]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404342]
  Citizen CDF-1001L Coolant Fed Single ID Tool Holder, 1" Dia. for M20/32 [404343]
  Citizen CDF-901, ID Tool Holder w/ Sub Spindle Machining, for M20/32 [404304]
  Citizen CDF-901, ID Tool Holder w/ Sub Spindle Machining, for M20/32 [404333]
  CITIZEN #CIT-BTW-2000-A220, THREAD WHIRLING, 2013, 12 pos ring, 25 deg adj [392652]
  CITIZEN CTF-2019, Coolant Fed OD Holder, 3/4" Sq, for M20/32 [404294]
  CITIZEN CTF-2019, Coolant Fed OD Holder, 3/4" Sq, for M20/32 [404422]
  CITIZEN CTF-419L Fixed Turning Tool Holder, 1" Shift for E32/E25/E25J, M20/32 [319952]
  CITIZEN, F10-U11Z, Fixed Guide Bushing for D-10 [201920]
  CITIZEN, F10-U11Z, Fixed Guide Bushing for D-10 [201921]
  CITIZEN, F10-U11Z, Fixed Guide Bushing for D-10 [201922]
  CITIZEN, F10-U11Z, Fixed Guide Bushing for D-10 [201923]
  CITIZEN, F10-U11Z, Fixed Guide Bushing for D-10 [201925]
  CITIZEN, F12S-U22Z, Non- Synchronous Rotary guide Bushing for an F12 [317597]
  CITIZEN, F12S-U10Z, FIXED GUIDE BUSHING, FOR F12-SERIES (ORIG) [68273]
  CITIZEN, F16S-U10Z, FIXED GUIDE BUSHING FOR F16 [205982]
  CITIZEN, F16S-U14Z, Fixed Guide Bushing for F16 [317596]
  CITIZEN, GDF506, 1 pos drill for Gang Slide on L(7)20 [396435]
  CITIZEN,GSC510 (GSC1010) Cross Milling/ Drilling Unit for L25/L32 NEW [396441]
  Citizen GSC-510 (GSC1010) Live Cross Drill, ER11, for M20/32 & L20/ [404305]
  CITIZEN, GSC510 (GSC1010), Live Cross drill for L32 New Replacement Cost $3,400 [395293]
  Citizen GSE-306, Rotary End Drilling-Milling For L516/20, M220 [396443]
  CITIZEN, GSE710, Rear Back Live Tool for L32 New replacement cost $2765 [395288]
  CITIZEN, GSE710, Rear Back Live Tool for L32 New replacement cost $2765 [395289]
  CITIZEN GSS950, Slitting Spindle for Cross Slide on K16 (pos T13 only) [396193]
  CITIZEN GSS950, Slitting Spindle for Cross Slide on K16 (pos T13 only) [396194]
  CITIZEN GSS950, Slitting Spindle for Cross Slide on K16 (pos T13 only) [396195]
  CITIZEN GSS950, Slitting Spindle for Cross Slide on K16 (pos T13 only) [396196]
  CITIZEN, GTF-1210L, VERTICAL TOOL HOLDER,6 POS,3/8" TLS,FOR L16 TYPE II,III,V&V [255915]
  Citizen HDS5506, Dbl Drill Sleeve "Long", 3/4"x50mm, ER11 w/flat for B12,C16,K16 [326834]
  CITIZEN, KDFZ-201, (2)POS DBL END FIXED,1/2 INDEX,FOR E25J/E32/M(2)20/M32 [262113]
  CITIZEN, KDFZ-201, (2)POS DBL END FIXED,1/2 INDEX,FOR E25J/E32/M(2)20/M32 [262114]
  CITIZEN KDFZ-201 (2)POS DBL END FIXED, 1/2 INDEX, E25J/E32/M(2)20/M32 [317098]
  CITIZEN KDFZ-201 (2)POS DBL END FIXED, 1/2 INDEX, E25J/E32/M(2)20/M32 [317100]
  CITIZEN/KENNEMETAL KM QUICK CHANGE BORING HEAD TOOL FOR E25J/E32/M(2)20/M32 [206980]
  Citizen KSA-107S Live Adjustment Angle Spindle, ER11 Collet, For M20/32 [404348]
  CITIZEN KSA307, Adj Angle Drill, 0-30 deg/ER-11 for E32/E25/E25J, M(2)20/32 [332333]
  Citizen KSA-407, 90 Deg. Adjustable Angle Spindle, ER11, for M20/32 [404349]
  Citizen KSC-110, Live Cross Drill/Mill, ER16 Collet, For M20/32 [404344]
  Citizen KSC-110, Live Cross Drill/Mill, ER16 Collet, For M20/32 [404345]
  Citizen KSC-110, Live Cross Drill/Mill, ER16 Collet, For M20/32 [404346]
  Citizen KSC-110, Live Cross Drill/Mill, ER16 Collet, For M20/32 [404347]
  Citizen KSE-110, Live Z-Axis Spindle for Face Drill/Mill, for M20/32 [404921]
  Citizen KSE-110, Live Z-Axis Spindle for Face Drill/Mill, for M20/32 [404352]
  CITIZEN, KSF-160, Rotary Side Cutter Spindle for E25J/E32/M(2)20/M32 [205911]
  CITIZEN, KSF-160, ROTARY SIDE CUTTER SPINDLE FOR E25J/E32/M(2)20/M32 [205912]
  CITIZEN, KSF-160, ROTARY SIDE CUTTER SPINDLE FOR E25J/E32/M(2)20/M32 [205913]
  CITIZEN, KSF-160, ROTARY SIDE CUTTER SPINDLE FOR E25J/E32/M(2)20/M32 [205914]
  CITIZEN, KSF-160, ROTARY SIDE CUTTER SPINDLE FOR E25J/E32/M(2)20/M32 [205934]
  CITIZEN, KSF-160, ROTARY SIDE CUTTER SPINDLE FOR E25J/E32/M(2)20/M32 [318621]
  Citizen KSM-110, Rotary Milling Spindle for M20/32 [404350]
  Citizen KSM-110, Rotary Milling Spindle for M20/32 [404351]
  CITIZEN, KSM-406, ROTARY MILLING, ER11, FOR E25J/E32/M(2)20/M32 [69034]
  Citizen KSW-101, Rotary Thread Whirling Spindle for M20/32 [404306]
  Citizen KSW-101, Rotary Thread Whirling Spindle for M20/32 [404420]
  CITIZEN, KTFZ-219L, (2)POS TRN (3/4+1/2) 1/2 INDEX, E25J/E32/M(2)20/M32 [206953]
  CITIZEN, KTFZ-219L, (2)POS TRN (3/4+1/2) 1/2 INDEX, E25J/E25/E32/M(2)20/M(2)32 [206954]
  CITIZEN, KTFZ-219L, Half-Index (2)POS TURN (3/4+1/2), E25J/E25/E32/M(2)20/M(2)32 [272397]
  CITIZEN KTFZ-219L 2-POS TURNING HOLDER (FOR 3/4 X 3/4 + 1/2 X 1/2 TOOL BITS)E32 [317096]
  CITIZEN KTFZ-219L 2-POS TURNING HOLDER (FOR 3/4 X 3/4 + 1/2 X 1/2 TOOL BITS)E32 [317097]
CITIZEN, No. L51620 U9131Z, Main Spindle Nut, S/N 0J011 M [292198]
CITIZEN, No. L520 TOOL BLOCK for 4 OD & 6 Rotary tools, Like New (Loc: IL) [337902]
  Citizen LTR0083-SE-01, Single ER11 Rotary End Drilling-Milling For L32/ M20/32 [404423]
  CITIZEN, LTR0083-SE-01, SINGLE END LIVE FACE Holder 16mm drill depth [395291]
  CITIZEN M(2)20 Rotary Guide Bushing with Housing; Never used, as-new [298220]
  CITIZEN M(2)20 Rotary Guide Bushing with Housing, Never used, As-New [298221]
  CITIZEN/S&M, MHSE-32, ADJUSTABLE KNURLING TOOL FOR CITIZEN E25J/E or M 20/32 [318629]
  CITIZEN, MSC-106, ROT CROSS DRILL for E16J/E16/E20/F12/16/M(2)12/16/M(1)20 [296400]
  CITIZEN MSC-106, Rot Cross Drill, ER11 for E16J/ M12/16/ M(1)20, F12/16 [392427]
  CITIZEN MSC-106, Rot Cross Drill, ER11 for E16J/ M12/16/ M(1)20, F12/16 [392467]
  CITIZEN, MSC306, End Face Drill (for backworking), ER11 for M12/M16 [401415]
  CITIZEN, MSC306, End Face Drill (for backworking), ER11 for M12/M16 [401416]
  CITIZEN MSE-103 ROTARY FACE DRILL FOR E16J/E16/E20/F12/16/M12/16/M(1)20 [345749]
  CITIZEN MSE-103 ROTARY FACE DRILL FOR E16J/E16/E20/F12/16/M12/16/M(1)20 [345752]
  CITIZEN MSE-103 ROTARY FACE DRILL FOR E16J/E16/E20/F12/16/M12/16/M(1)20 [345753]
  CITIZEN MSE-103 ROTARY FACE DRILL FOR E16J/E16/E20/F12/16/M12/16/M(1)20 [345754]
  CITIZEN MSE-103 ROTARY FACE DRILL FOR E16J/E16/E20/F12/16/M12/16/M(1)20 [345755]
  CITIZEN MSE-106, Rot End Drill, ER11 for E16J/ M12/16/ M(1)20, F12/1620 [345746]
  CITIZEN MSE-403, Rot Deep Face Drill, TF-8 for E16J/ M12/16/ M(1)20, F12/16 [392489]
  Citizen Spindle Nut 31mm Hole, 80mm OD, 62mm back ID, 41mm tall [317603]
  Citizen Spindle Nut 21mm Hole, 55mm OD, 42mm back ID, 42mm tall [317606]
  Citizen Spindle Nut 21mm Hole, 50mm OD, 42mm back ID, 30mm tall [317609]
  CITIZEN VDF701, Triple Sleeve Holder (3/4") for M12/M16, M(1)20 [345750]
  CITIZEN, VSC-103, EXT 13 DEG CROSS DRILL,E16J/F12/F16/M12/M16/M(1)20 [65113]
  CITIZEN, VSC-103, EXT 13 DEG CROSS DRILL,E16J/F12/F16/M12/M16/M(1)20 [65114]
  CITIZEN VTF1510, Double Turning Tool Hldr w/ Coolant for M12/16, M(1)20 [345751]
  CITIZEN-JARVIS, LTR0132, THREAD WHIRL Tool for L51620VII or L51620VIII, 3 tooth [398286]
  Citizen-Jarvis, LTR0132, Thread Whirl Tool for M20/32 [404421]
  (NEW) CITIZEN, CIT-KSW101, Thread Whirler for E-32, M(2)20/32 [294518]
  (NEW) GENEVIEVE NEW Rotary Broach, CNC Swiss/Gang-Tl, Does not need indicator [399050]
(NEW) A&M is a distributor for Precison Tooling from Genevieve Swiss [338629]
(NEW) GENEVIEVE CITIZEN, No. CIT-LSW215-U12.1, WHIRLING SPINDLE, for L520, M20/32 gang [305483]
  MITSUBISHI, No. 310LN, Off Nomura SN160, Board, Control Panel, [396574]
  PCM, 3721, TURNING ADJUSTABLE ADAPTER FOR 3/8" X 3.8" TOOL HOLDER [272286]
  REGO, ADP ER25M/ER16M, Adapter [272280]
REGO, ADP ER25M/ER16M, Adapter [287404]
REGO, ADP ER25M/ER16M, Adapter [287405]
  SCHAUBLIN, 61-16609, ADAPTER, ER25/ER16 [272281]
  STAR, 221-13, TRIPLE DRILL SLEEVE FOR KNC-16/20, KJR-25 [272463]
  STAR, 221-16, SINGLE DRILL HOLDER BACK WORKING FOR KNC-16/20 [272462]
  STAR 331-45-00, Boring Sleeve, 3/8" for Star SR-32 [296485]
  STAR 331-47-00, Boring Sleeve, 1/4" for Star SR-32 [296484]
  (NEW) Star 3X Speed Live Rotary Tool for SV & SR Series lathes, fits 331-50-00 [327705]
  STAR, 736-07, WEDGE TL HLDR FOR INVERSE SETTING, FOR KJR-16,JNC-25/32,VNC-20 [71758]
  STAR, 736-51, ROTARY CROSS TAPPING UNIT FOR KJR-16 AND VNC-20 [71699]
  STAR, 736-59, OFF CENTER CROSS TAPPING UNIT FOR KJR-16 AND VNC-20 [71759]
  STAR 781-03, Wedge Free Turning Tool Hldr, 16mm for Star ECAS32/KNC32/SV32/VNC32 [346036]
  STAR 781-03, Wedge Free Turning Tool Hldr, 16mm for Star ECAS32/KNC32/SV32/VNC32 [346037]
  STAR 781-05, Wedge Free Longitudinal Adj Turn Tool Hldr, 16mm, ECAS32/KNC32/SV32 [346051]
  STAR 781-05, Wedge Free Longitudinal Adj Turn Tool Hldr, 16mm, ECAS32/KNC32/SV32 [346052]
  STAR 781-05, Wedge Free Longitudinal Adj Turn Tool Hldr, 16mm, ECAS32/KNC32/SV32 [346053]
  STAR 781-05, Wedge Free Longitudinal Adj Turn Tool Hldr, 16mm, ECAS32/KNC32/SV32 [346054]
  STAR 781-05, Wedge Free Longitudinal Adj Turn Tool Hldr, 16mm, ECAS32/KNC32/SV32 [346055]
  STAR 781-05, Wedge Free Longitudinal Adj Turn Tool Hldr, 16mm, ECAS32/KNC32/SV32 [346056]
  STAR 781-06, Wedge Free Cut Off Holder, 16mm for Star ECAS32/KNC32/SV32/VNC32 [346040]
  STAR 781-06, Wedge Free Cut Off Holder, 16mm for Star ECAS32/KNC32/SV32/VNC32 [346041]
  STAR 781-06, Wedge Free Cut Off Holder, 16mm for Star ECAS32/SV32/KNC32/VNC32 [346043]
  STAR 781-06, Wedge Free Cut Off Holder, 16mm for Star ECAS32/KNC32/SV32/VNC32 [346044]
  STAR 781-06, Wedge Free Cut Off Holder, 16mm for Star ECAS32/KNC32/SV32/VNC32 [346045]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC32 [346026]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC32 [346029]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC323 [346030]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC323 [346031]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC32 [346032]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC32 [346033]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC323 [346034]
  STAR 781-09, Wedge Longitudinal Adj Turn Tool Hld, 16mm, for ECAS32/SV32/KNC32 [346035]
  STAR, PART CATCHER FOR SA-12/16 [317590]
  STAR, PART CATCHER FOR SA-12/16 [317591]
  STAR/WTO 410507000-22 Cross Drill/Mill Unit for BW T2100-T2400, ER11, SR20R ser [391514]
  (NEW) Swiss Silver Cutting Oil "A", For Most Metals [326835]
  TORNOS, 305089, Deco 10 Adj of Counter Collet Clamping Pressure (2 Shown) [287456]
  TORNOS, 305089, Deco 10 Adj of Counter Collet Clamping Pressure (2 Shown) [287457]
  TORNOS, 562030, COLLET SLEEVE for ENC 162/164 [287170]
  TORNOS, 562030, COLLET SLEEVE for ENC 162/164 [287171]
  TORNOS, 562040, COLLET Sleeve [287449]
  TORNOS, 562040, Collet Sleeve [287450]
  TORNOS, 562040, Collet Sleeve [287452]
  TORNOS, 562464, Collet Sleeve [287455]
  Tornos/Goltenbodt, Rotary Spindle for Multi-Deco [287294]
  Tornos/Goltenbodt, Rotary Spindle for Multi-Deco [287295]
  TORNOS/AUTOR Multi-Deco Broaching Spindle [287297]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287107]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287219]
  Tornos/Goltenbolt CK44001/BA41003, 20X20mm Hldr, for Multis [287220]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287221]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287222]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287223]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287224]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287225]
  Tornos/Goltenbolt, CK44001/BA41003, 20X20mm Hldr, for Multis [287226]
  Tornos/Goltenbolt, PA44025, Form Tool Dove Tail Hldr for Multis [287111]
  Tornos/Goltenbolt, PA44025, Form Tool Dove Tail Hldr for Multis [287202]
  TORNOS/SALVO, LH 4918 Salvo Thread Roller with a 312TOR-1 Tornos Multi Deco Hldr [287296]
  TSUGAMI Turning Holder, like 3177-Z214 but 4.5x2.5" base for NP20/NP32/MU38 [323181]
  TSUGAMI 3177-H010(mod), Drill Sleeve Holder, 3/4" hole, NP20/NP32, MU38 [323170]
  TSUGAMI 3177-H010(mod), Drill Sleeve Holder, 3/4" hole, NP20/NP32, MU38 [323171]
  TSUGAMI 3177-H010, Drill Sleeve Holder, 1" hole, NP20/NP32, MU38 [323174]
  TSUGAMI 3177-Z214, Turning Tool Holder (CW) for NP20/NP32, MU38 [323176]
  TSUGAMI 3177-Z214, Turning Tool Holder (CW) for NP20/NP32, MU38 [323177]
  TSUGAMI CROSS DRILL(?) for NP20/32/MU38 [323183]
TSUGAMI, THREAD WHIRLER for a BS20CIII [392844]
  Drill Sleeve, 1" Diam x 33mm L, no flat, ER20 Collet, Schaublin 62-20001 [317620]
  Drill Sleeve, 1" Diam x 33mm L, no flat, ER20 Collet, Schaublin 62-20001 [317621]
  Drill Sleeve, 1" Diam x 33mm L, no flat, ER20 Collet [317622]
(NEW) We sell Precision CNC & CNC Swiss tooling by WTO, Madaula, GenSwis, etc [338627]

0A8006   AUTOMATIC SCREW MACHS., MULT. SPDL.
  1 1/4" Acme Gridley RA-6, 6-apindle, 1 Set of Tooling & Gears, Chip Conveyor [326978]
  1-1/4", ACME GRIDLEY, No. RA-6, Thread roll, tooling, stand and reel [398568]
  1 1/4",MITS. ACME GRIDLEY,No. MRA-6,1980,6-SPINDLES,STOCK REEL & STAND [66396]
  1 1/4",MITS ACME GRIDLEY,No. MRA-6,1980,6 SPLINDLES, STOCK REEL & STAND [66397]
  1 1/4",MITS ACME GRIDLEY,No. MRA-6,1970,6 SPINDLES, STOCK REEL & STAND [66398]
  1 1/4",MITS ACME GRIDLEY,No. MRA-6,1971,6 SPINDLES,STOCK REEL & STAND [66399]
  1 1/4",MITS ACME GRIDLEY,No. MRA-6,1978,6 SPINDLES,STOCK REEL & STAND [66427]
  1-1/4", New Britain, Mdl 52, 6-spindle, Threading, stock reel [398567]
  2-1/4, New Britain, Mdl 62, 6-Spindle, Thrd Roll, die head, tooling, reel [398566]

0A8050   AUTOMATIC SCREW MACHS., MULT. SPDL., N/C & CNC
  3/4", TORNOS, MULTI ALPHA 20, FANUC, 2006, 8-spindle, Backworking, HPC, Barfeed [395822]
  1", TORNOS MULTI DECO 26/6, 2000, 6-slides, 17-AXIS, tooling, XLNT Cond [403274]
  1 1/4", Tornos Multideco 32/6, Fanuc PNC, 2010, Auto Bar Loader, All tooling [402103]
  1 3/8", METRA, No. 6.35 CXZ, MITSUBISHI C70, 2015,6-spindle, 5XZ slides [393523]

0A8150   AUTOMATIC SCREW MACHINES, SWISS TYPE
  5/32", ESCOMATIC, No. D4, 2 Cutting Tools [392141]
  5/32", ESCOMATIC, No. D4, 2 Cutting Tools, square base [392142]
  5/32", ESCOMATIC, No. D4, 2 Cutting Tools [392143]
  5/32", ESCOMATIC, No. D4, 2 Cutting Tools [392144]
  5/32", ESCOMATIC, No. D4, 2 Cutting Tools [392215]
  5/32", ESCOMATIC, No. D4, 2 Cutting Tools, coil stand [392216]
  3/16", ESCOMATIC, No. D2, SQ Base, [345118]
  3/16", ESCOMATIC, No. D2, SQ Base, Rebuilt head [401185]
  3/16", ESCOMATIC, No. D2, 6,000 - 8,000 RPM [392138]
  3/16", ESCOMATIC, No. D2, 6,000 - 8,000 RPM [392139]
  3/16", ESCOMATIC, No. D2, 6,000 - 8,000 RPM [392140]
  3/16", ESCOMATIC, No. D2, 6,000 - 8,000 RPM [392221]
  1/4", ESCOMATIC, No. D6, Coil Fed, 3 Cutting Tools [392135]
  1/4", ESCOMATIC, No. D6, Coil Fed, 3 Cutting Tools [392210]
  1/4", ESCOMATIC, No. D6, Coil Fed, 3 Cutting Tools [392211]
  1/4", ESCOMATIC, No. D6, Coil Fed, 3 Cutting Tools [392212]
  1/4", ESCOMATIC, No. D6, Coil Fed, 3 Cutting Tools [392213]
  1/4", ESCOMATIC, No. D6, Coil Fed, 3 Cutting Tools, Long piece attch [392214]
  Package of 6 Cam Swiss Screw Machines, (4) Strohm M-125 and (2) Tornos M7 [336146]
  (2) 3/4", BECHLER, BR20, Spindle Brake and Spindle Indexing, Auto Loader [400996]

0A8175   AUTOMATIC SCREW MACH., SWISS TYPE, N/C & CNC
  5/16" (8mm), ESCO, No. EC08, FANUC 18ITB, 2013 [394756]
  3/8" TORNOS Deco 10a, PNC, 2004, 9-Axis, Robobar Magazine Bar Feed [403747]
  1/2 Citizen BL12V CNC lathe, 2004, Fanuc, hopper feed [399851]
  1/2", Citizen M12, Cincom, 1999, LNS Hydrobar, HPC, Live Tool, Rotary GB [404467]
  1/2", Citizen M12, Cincom, 2000, LNS Hydrobar, HPC, Live Tool, Rotary GB [404468]
  1/2", HANWHA SL12E, FANUC 0IT, 2002, 6OD/5ID-BW, MTA Magazine BF [403462]
  1/2", STAR, ECAS 12, SIEMENS 840DI, 2005, 10 Axis, C-Axis Main/Sub [391510]
  5/8" Star SA-12, Fanuc 18IT, 1999, Sync Rot GB, 3 live, Iemca Genius Loader [403289]
  5/8" Star SA-12, Fanuc 18IT, 2000, Sync Rot GB, 3 live, LNS Tryton BF [403830]
  5/8" Star SA-12, Fanuc 18IT, 1999, Sync Rot GB, 3 live, Iemca MiniBoss 325 [403929]
  1/2" STAR SA-12,FANUC 18iTA,1999,2LIV/6OD/4ID/4BW,15DEG INDX, SUB-SPNDL, LNS BF [401242]
  1/2" STAR SA-12, Fanuc 18iTA, 1997, 2Liv/6OD/4ID/4BW, LNS Tryton Loader [394703]
  1/2", TSUGAMI BO124, FANUC 0ITD, 2011, 9OD/4ID/BW, Chucker, LNS Tryton BF [404925]
  1/2" TSUGAMI BW-12III, FANUC 16i-TB, 2012, Split Slides, Edge Minuteman [400980]
  5/8" Citizen C16 Type VII (1M7), 2006, 5-Axis, 4Rot/6OD/6ID-Sub spindle, loader [404885]
  5/8" Citizen C16 Type IX(1M7), 2006, 5-Axis, 4Rot/6OD/6ID-Sub spindle [404898]
  5/8", CITIZEN E16J, Mits Cntrl, 1993, 5-Axis, C-Axis, LNS Hydrobar [401400]
  5/8" Citizen K16VII (1F7P), 5-Axis, LNS Express 220 Loader, Static/Live Tooling [402505]
  5/8" Citizen K16VII (1F7P), 5-Axis, LNS Express 220 Loader, Static/Live Tooling [404842]
  5/8", Citizen, L(3)16VI, 1994, (2) rotary, 5OD, 3ID, 3BWID, 15 deg [338310]
  5/8" STAR RNC 16, Fanuc 0T, 5OD/3ID, Simultaneous Turning, Gravity BF [332385]
  5/8" STAR SA-16RC, Fanuc 18iTB, 2003, 3 Live/6OD/4ID/4BW, C Axis, LNS Express332 [404586]
  5/8" STAR SB-16C, FANUC 18I-TB, 2003,3Live/5OD/4ID/2BW, C Axis, LNS Express [403910]
  3/4", Citizen A20VI, Fanuc 32iA, 2007, 6-Axis, C-Axis, Bar Feeder [401361]
  3/4", Citizen A20VII, 2013, Fanuc 32i, C-320 Bar Loader, HPC, Chip conveyor [404114]
  3/4", Citizen A20VII, Fanuc 32iA, 2008, 6-Axis, Sub-spindle, Live tools [403823]
  3/4", Citizen A20VII, Fanuc 32iA, 2008, 6-Axis, Sub-spindle, Live tools, Loader [404238]
  3/4", Citizen, L20EIX (1M9),2010, HPC, Mist Collector, Bar Loader, Chip Conv [403860]
  3/4" Citizen L(3)20VII, 1996, 3 live/5OD/3ID/3BW, LNS Hyd b/f, sub spindle [400231]
  3/4" Citizen L20VII (5M7),'98, 4Rot/6OD/3ID/4BWID, C-axis, Live tool, sub spindl [390965]
  3/4" Citizen L20VII (5M7),'98, 4Rot/6OD/3ID/4BWID, C-axis, Live tool, sub spindl [396755]
  3/4" Citizen L20VII (5M7),'98, 4Rot/6OD/3ID/4BWID, C-axis, Live tool, sub spindl [400417]
  3/4" CITIZEN L20VII (5M7), 2001, C-Axis, 4-Rotary/6OD/3ID/3BW, HPC, CAV [402958]
  3/4" Citizen L20VIII (7M8), 2006, 10 Live, CAV Loader, HPC, LPA, Chip Conv [403859]
  3/4" Citizen L20VIII (7M8), 2007, 10 Live, C-axis, sub spindle, parts conveyor [404424]
  3/4" Citizen L20VIII (7M8), 2007, 10 Live, C-axis, sub spindle, Magazine Loader [404708]
  3/4", Citizen M20, 1996, Gang-Turret, 7-axis, Spego 123 Barfeed, live tools [400396]
  3/4" CITIZEN M20, Cincom IVB, 1998, LNS HYS 3.20-HS-4.8 Bar Feed [404542]
  3/4" CITIZEN M20 (2M3) CINCOM M6B, 2001, Gang Turret, Sub-Spindle, Bar Loader [402649]
  3/4",Citizen M20, Mitsubishi, Gang-Turret, 7-axis, Loader, Sub spindle [399638]
  3/4" EUROTECH POLYGIM, KOBRA 20SLY, 2016, Mits, Loader, Mits, 7-axis, sub, live [399748]
  3/4" EUROTECH POLYGIM, KOBRA 20SLYB, 2015, Mits, Loader, Mits, 7-axis, sub, live [400236]
  3/4", Ganesh Genturn SL20Y2, Mitsubishi M830, Dual C & Y Axis, "New", 2018 [403961]
  3/4", Ganesh SL-20Y2, 2018, Mits 830, Dbl Y-axis, Sub-Spindle, Only 430 HRS [403800]
  3/4", HARDINGE, ST-220B, Fanuc 18TB, Gang Tool, Sub-Spdl, C-Axis, 6' LNS Express [399232]
  3/4" KSI SM20, FANUC 18iTB, 2009, 4 Live/6OD/5ID/2 Live ID, 3+1BW, Tracer, HPC [400909]
  3/4", MAIER, No. ML20C, FANUC, 2004, MTA Bar Feed [402836]
  3/4" NEXTURN SA20D, Fanuc 18iTB, 2008, 9 Rot Tools, 7' Bar Ldr, Thread Whirler [396485]
  3/4", NOMURA NN20UB8, MITSUBISHI, 2012, 4 live, 3IDBW/1ODBW, MTA Tracer BF [401398]
  3/4" STAR SR20, Fanuc 16T, 1997, 4Live/5OD/3ID/3Bkwkg, LNS HYS 3.20 Bar Feed [403599]
  3/4", STAR SR20, FANUC 16TA, 1993, 3ROT/5OD/3ID/3BW, 15DEG INDX, [401407]
  3/4", STAR, No. SR20JN, FANUC 31ITB, 2017, no Guide Bushing, Chip Cnvyr, Iemca [404444]
  3/4", STAR, No. SR20JN, FANUC 31ITB, 2017, no Guide Bushing, Chip Cnvyr, Iemca [404445]
  3/4" STAR SR-20RIII, Fanuc 300iSA, 2010, Edge Scout Magazine Bar feed [400916]
  3/4" STAR SR20RIV, FANUC 31TB5, 2013, B-Axis, Edge Minuteman BF, HPC [404550]
  3/4" Star SV20 CNC Swiss, Fanuc 16T, 2001, 9-axis, Gang + Turret, Iemca Genius [398510]
  3/4" STAR SV-20, FANUC 16TC, MFG'98/INST'99, GANG+TRRT, LNS Mag BF [403843]
  3/4" TSUGAMI BO205III, FANUC 0i-TF, 2018, 7-axis, LNS Alpha ST320 S2 Mag BF [403673]
  3/4" TSUGAMI BO205III, FANUC 0i-TF, 2018, 7-axis, HPC, Edge Scout BF [403991]
  3/4" TSUGAMI BO205III, FANUC 0i-TF, 2018, 7-axis, Live BW, Edge Scout BF,2 avail [404785]
  3/4" TSUGAMI BO206III, Fanuc 31iTB, 2016, HPC, Tri-Mist, Chip Cnvyr, No BF [404707]
  3/4" TSUGAMI BS-19B,FANUC LE-1,5 AXIS, 15 DEG INDEXING, Iemca Bar Feed [400817]
  3/4" TSUGAMI BS20B (SX20B) 1995, Fanuc LA-1, 3Rot/7OD/4ID/3BW. Iemca Loader [394770]
  3/4" TSUGAMI BS20BII, Fanuc LH-1, 2000, C-Axis, Sub, Iemca Mag BF [400702]
  3/4" Tsugami BS20BIII, Fanuc LK1, 4Rot/6OD/4ID/3BW, MTA Barfeed [401388]
  3/4" TSUGAMI S205, Fanuc 31ITB, 2016, High press, Mist Coll, FMB MiniMag 20 [404163]
  3/4" TSUGAMI S205, Fanuc 31ITB, 2014, Mist Coll, Iemca Elite [404961]
  3/4" TSUGAMI SS-20, Fanuc 13iA, 2008, 7 Controlled Axes, HPC, Bar loader [401550]
  3/4" YAMA SEIKI SW20, FANUC 31iTB, 2011, 5live/6OD/4ID/4live BW, Mag BF [400582]
  1" CITIZEN L25 CINCOM SYSTEM IVC, 1996, 4LIVE/6OD/4ID/4BWID TOOLS, SUB, BF [396375]
  1" CITIZEN L25 CINCOM SYSTEM IVC, 1996, 4LIVE/6OD/4ID/4BWID TOOLS, SUB, IEMCA BF [399145]
  1" Citizen L25 (4M7) CNC Swiss, CINCOM IVC,'96, 4Rot/6OD/4ID/4BWID, Loader [399635]
  1",HARDINGE ST225B, FANUC 18T, 2001, C-Axis, Sub. Live Tlng,6' LNS EXPRESS 225 [399231]
  1" HARDINGE ST225B, FANUC 18T, 1999, C-Axis, Sub. Live Tlng, 6' Bar Feed [399961]
  Miyano BX26S, Fanuc 18i-TB, 1", 2006, Sub Spindle, 8,000 RPM, Iemca Loader [402393]
  1" NOMURA NN25YB, MITSUBISHI, 2013, 8-Axis, LNS Alpha ST320 S2 Magazine Bar feed [403698]
  1" TORNOS BECHLER DECO 20/25.4, PNC DECO, 1999,12-AXIS, SUB-SPNDL, TORNOS MAG BF [404477]
  1.023", TRAUB TNL26, SIEMENS, 2001, 13-axis, TX8i control, LNS Express Loader [402650]
  1.023", TRAUB TNL26, SIEMENS, 2001, 13-axis, TX8i control, LNS Express Loader [402651]
  1", TSUGAMI BO265II, FANUC 0ITD, 2018, Ikura Seili Magazine Bar Feed [404962]
  1", TSUGAMI, BS26B(SX26B), Fanuc LA1,'96, 3LIVE/7OD,4ID/3BW, C-Axis, Iemca BL [402839]
  1" Tsugami BS26CIII, Fanuc LK-1, 2000, 9Rot/6OD/6ID/8BW, C-axis, HPC, LNS HYS [404287]
  1" TSUGAMI MU26SY, FANUC 18-ITA, 2003, 2x8 Pos. Turret, LNS Mag BF [404930]
  1-1/4", CITIZEN A32VII, MITS, 2012, Live tools, sub spindle, mag loader [403759]
  1 1/4", CITIZEN, C32VIII (2M8), CINCOM, 2006, HPC,Mist Collector, Loader [404579]
  1 1/4" CITIZEN E32, MITSUBISHI, 1999, 2-Trrt, Chip Convyr, Magazine Bar Feed [392198]
  1 1/4" Citizen L32VII (4M7) Mits 520, '99 4Rot/5OD/3ID/5BW, Iemca Loader [398349]
  1 1/4" Citizen L32VII (4M7) Mits 520, '00 4Rot/5OD/3ID/5BW, LNS Loader [404130]
  1 1/4", CITIZEN, L32VII,Mitsubishi, 2004, Sub, Live tools, HPC, Bar Feed [403515]
  1 1/4", Citizen, L32VIII, Cincom, 2015, HPC, Mist Collector, CAV loader [404178]
  1 1/4", Citizen M-32 III, 2004, Iemca Mini Boss, HPC, C-Axis, Live Mill/Drill [404313]
  1-1/4", CITIZEN M32V, 2004, 10-axis, Gang & Turret Y-axis, Bar Loader [402364]
  1-1/4", CITIZEN M32V, 2004, 10-axis, Gang & Turret Y-axis, Bar Loader [402669]
  1 1/4", DMG Mori Seiki Sprint 32/8, Fanuc 32iB, Live Tooling, Barfeed, Mist Coll [404217]
  1 1/4", Eurotech, Polygim Zeit 32SY2, 2011 [400737]
  Ganesh Cyclone 32 CS, 2012, 1.25" cap, 11-live, gang tool, sub spindle, Loader [400405]
  Ganesh Cyclone 32 CS, 1.25" cap, 9-live, 2007, Gang Tool, Sub Spindle, Chip Aug [404544]
  Ganesh Cyclone 32CS, 2013 (deliv 2014), 1.25" cap, 11-live, gang tool, sub spind [400862]
  1-1/4" GANESH CYCLONE 32NCY, 2009, 4-axis, Gang, sliding headstock, 7-live tools [336196]
  1-1/4" GANESH CYCLONE 32NCY, 2010, 4-axis, Gang, sliding headstock, 7-live tools [394347]
  Ganesh GenTurn 32GT, 2018,"New",1.25" cap,11-live, gang tool, Sub Spindle,C-axis [403951]
  1 1/4" MAIER ML32D, Fanuc 18iTB, 2005, 12 live/6 OD/4ID/4BW, HPC, LNS Loader [392700]
  1 1/4" NOMURA NN32YB2, 2016, B-axis, C-Axis, Convertable, 33 tools, Low Hours [404033]
  1-1/4" Star ECAS 32T, 2008, 11-Axis, Sub-Spindle, 2x10 Pos Trrts, Y-Axis, sub [404246]
  1 1/4" STAR SR32, Fanuc 16TT, 1998, 4Rot/6OD/4ID/4BWID, no barfeed [398827]
  1 1/4" STAR SR32J, Fanuc 18iTB, 2005, 6OD/4ID-BW/4 BW, LNS Express 332 [403748]
  1 1/4" STAR SR32J, Fanuc 18iTB, 2007, 6OD/4ID-BW/4 BW, LNS Express 332 [404549]
  1 1/4" STAR SR32J, Fanuc 18iTB, 2007, 6OD/4ID-BW/4 BW, HPC, FMB Turbo 3-36 [404560]
  1 1/4" STAR SR32J, Fanuc 18iTB, 2007, 6OD/4ID-BW/4 BW, LNS Express 332 [404709]
  1 1/4", STAR SR32JIIB, FANUC 32I-B, 2018, Convertible, HFT, Iemca Boss 338 [403439]
  1 1/4", Star SV32J, Fanuc 18iTB, 1999, LNS Express 332 [404906]
  1 1/4", STAR, SV32JII, FANUC 18iT, 2002, Gang+Turret, Iemca [403285]
  1 1/4", STAR, SV32JII, FANUC 18iT, 2002, Gang+Turret, Iemca [403286]
  1 1/4" STAR, SV32JII, Fanuc 18iTB, '06, Gang+Turret, C-Axs, FMB MiniBoss [401853]
  1 1/4" TSUGAMI BO325II, Fanuc 0iTD, 2015, HPC, Mist Collector, Magazine Loader [397178]
  1 1/4" TSUGAMI BO325II, Fanuc 0iTD, 2013, Edge Patriot BF, 4000hours [401408]
  1 1/4" TSUGAMI BO325II, Fanuc 0iTD, 2014, HPC, Mist Clltr, LNS ALpha BF [401213]
  1 1/4" TSUGAMI BO325II, Fanuc 0iTD, 2013, Edge Patriot BF, Low hours [403966]
  1 1/4" TSUGAMI BO326II, Fanuc 31iTB, 2016, w/ Chuck Kit, HPC, Mist Collector [403331]
  1 1/4" TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Collector [403339]
  1 1/4" TSUGAMI BO326II, Fanuc 31iTB, 2013, w/ Chuck Kit, HPC, Mist Clltr, BF [392710]
  1 1/4" TSUGAMI BO326II, Fanuc 31iTB, 2013, HPC, Mist Clltr, BF [404747]
  1 1/4" Tsugami, BS32CII, Fanuc,'98, 7-Axis, Iemca Loader, Misc Tooling [400395]
  1 1/4", TSUGAMI BS32CIII, Fanuc LH1, 2003, 7-Axis, live backwork, LNS Express BF [396759]
  1-1/4", Tsugami SS-32, Fanuc 32iB, 2011, 9-axis, HPC, Bar loader [404509]
  1-1/4" YAMA SEIKI SW32, Fanuc,2015, 5-10 live/6OD/4ID/4live BW, Bar Ldr, Convert [400583]
  1-1/4" YAMA SEIKI SW32, Fanuc,2014, 5-10 live/6OD/4ID/4live BW, Bar Ldr [403549]
  1 1/4" MAIER ML36E, Fanuc 160iTB, 2006, 12-Axis, Y-Axis, Turret + Gang [399526]
  1 1/2", Citizen, L38VIII (1M8), 2015, HPC, Mist Collector, CAV loader [404179]
  1 1/2" Hanwha XD38HII, Fanuc 32i, 2015, 8-Axis [402519]
  1-1/2" KSI SQC38, Fanuc 18iTB, 2006, 4Live/6OD/5+1+2ID/1+3BW, C Main/Sub, loader [402743]
  1 1/2", KSI TCM-38S, FANUC, 2017,7-axis, 9Live/13 fixed, HPC, Chip C, Loader [403552]
  1 1/2", STAR SV38R, FANUC 31IB5, 2018, HPC, Mist, LNS Mag BF. LOW HOURS [402690]
  1-1/2" TSUGAMI BH38, 2006, Fanuc 31iT, Gang-Turret 11-axis, Sub spindle, FMB [393382]
  1 1/2" TSUGAMI, BO385-II, FANUC OITD, 2014, Tracer Mag Bar Feed [402374]
  1 1/2" TSUGAMI, BO385-II, FANUC OITD, 2011, FMB Turbo Bar Feed [403699]
  1 1/2" TSUGAMI BO385II, Fanuc 0iTD, 2018, HPC, Mist Collector, Magazine Loader [403589]
  1-1/2", Tsugami BO385L, FANUC, 2012, Chucker Version, No GB, FMB 338 [404615]
  1-5/8", Ganesh Genturn SL42Y2 Hybrid, Mits M830, 2018, Front/Back Y axis, [404619]
  1-5/8", POLYGIM 42CSL (Eurotech), MITS M70, 2013, B-Axis, Loader, XLNT [401392]
  1 5/8", SWISTEK, No. AB42 HYBRID, 38mm w/ GB, FANUC, 2012, 7-axis, loader [403523]
  1 5/8", SWISTEK, No. AB42 HYBRID, 38mm, FANUC, 2011, 7-axis, loader [400807]
  1 5/8" TSUGAMI TMU1, FANUC 18iTB, 2007, Low Hours, 9-Axis, B Axis, LNS HYS [397340]
  CITIZEN THREAD WHIRLING TOOL, #CIT-BTW-2000-A220, 2013, 12 pos ring, like new [392729]

0B1103   BAR FEEDS,MECHANICAL,HYDROSTATIC & HYDRODYNAMIC
  Lexair Mini Rhino Bar 1/4"- 1 5/8, 2004, 6', fix/slide hdstk [403278]
  1/2"Cap, LNS HYS 3.12 HS4.8, 1999, for sliding or fixed Headstock [395418]
  Pkg of 3: (1) 5/8" & (2) 3/4" cap, SPEGO 123-5Z/6Z x 12', slidg hdstk, Loc: NJ [403717]
  3/4" Dia, LNS HYS 3.20 HS 6', 2005, 3 tube gatling type, sldng or fixed hdstk [398151]
  1/16"-3/4" LNS HYS 3.20 HS-4.8, Super Hydrobar,2002, 3-Tube Gatling [396383]
  1/16"-3/4" LNS HYS 3.20 HS-4.8, Super Hydrobar,'96, 3-Tube Gatling Style [404491]
  3/4"Dia, LNS HYS 3.20 HS-4.8, 12', 2000, 24V Control, fixed or sliding headstock [399044]
  3/4" Dia, SMW, Omni Bar FSQ-20, 12', 3 Tube [404112]
  5/8" & 1"Dia, HARDINGE, No. HARMATIC SAM 45, 12', 1992, (16mm & 25mm Tube) [342400]
  (NEW) New Gravity Barfeed [286183]
  Iemca Trilogy 332/12, 1/8" - 1 1/4" DIA. X 12', Fixed or Sliding Headstock [344075]
  1/16" - 1 1/4" x 12', LNS HYS 6.32 HS 4.8, 6-Tube Gatling Style [402810]
  1/16" - 1 1/4" x 12', LNS HYS 6.32 HS 4.8, 1999, 6-Tube Gatling Style [404227]
  1 5/16"Dia, LNS, No. HYS 6.35 HS4.8, 12', 1996, 115V [396964]
  Lexair Mini Rhinobar (MRB 1.62), 1/4"-1-5/8", 2007 [403851]
  (NEW) NEW Lexair Mini Rhinobar (MRB 1.62), 1/4"-1-5/8", w/ 3 Feed Tubes; 6' or 12' [205338]
  1/4" - 1 5/8"x 12', LNS HYS 6.42 HS 5.2, 1999, for fixed headstock [404931]
  1/4" - 1 5/8"x 12', LNS HYS 6.42 HS 5.2, 1995, for fixed headstock [404932]
  1/4 - 1 5/8"Dia, SPEGO, 66-13, 6', 1998, 6-Tube Hydraulic for Fixed Headstock [402351]
  (NEW) NEW 1 /4 - 2 3/4"Dia, Lexair Rhinobar (RB 2.5) 6' or 12' Bar Feed [285621]
  3/4" - 2 1/2" x 6', LNS, HYS 6.65 HS 3.3, 2011, six guide tubes [402553]
  (NEW) NEW 1 /4 - 3"Dia, Lexair Rhinobar (RB 3.0) 6' or 12' Bar Feed [333572]
  (NEW) LEXAIR Multi Mini Rhinobar, 6' or 12', three sizes (NEW) [340892]
  LNS Hydraulic Tank Only for LNS Hydrobar Up to HYS 6.42 and All THBs [315798]
  LNS Hydraulic Tank Only for LNS Hydrobar Up to HYS 6.42 and All THBs [315800]
  LNS Hydraulic Tank Only for LNS Hydrobar Up to HYS 6.42 and All THBs [315801]
  (NEW) LNS Super Hydrobar Series Bar Feeds for Fixed and Sliding Headstock, NEW [314916]

0B1120   BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
  (NEW) 0.2 - 2 mm (0.12" - 1/16") IEMCA ELITE ZERO, 12', for sliding headstock [403408]
  (3) ea 11mm Channels complete sets for an LNS Express 220/226 12' Bar Loader [396008]
  (NEW) .059' - 1/2"Dia, EDGE RANGER 112, 12', for Sliding or Fixed Headstock [399126]
  (NEW) .028 - 1/2"Dia, IEMCA Elite 112, 12', for sliding Headstock - NEW [315257]
  0.04 - 1/2" x 12'L, Iemca Genius 112/37, 1999, Sliding Hdstock [396081]
  Iemca Genius 112/37, 12', 2000, Right to Left, 13mm Channels [402454]
  (NEW) 1/2"Dia, LNS, No. GT-112E, 0.8mm - 11mm, 12', 2018, Sliding Headstock, NEW [399674]
  (NEW) LNS Tryton 112 choice of Barrel, .039"-.5"(1-12MM) Dia X 12', NEW [205986]
  12', LNS Tryton SST4.R, 1995, 11mm barrel and spare 6mm barrel [402461]
  FMB Minimag 18, 2mm to 18mm x 6', for Fixed or Sliding Headstock [399065]
  (NEW) New FMB Minimag 20, 2mm to 20mm x 12', for Fixed or Sliding Headstock [302865]
  3/4"Dia, CITIZEN, CAV20-IS,2006, 12', standard and small bar adaptor [395240]
  (NEW) FMB Micromag .8mm - 20mm, .031" - .787" Dia x 12', Swiss or Fixed Headstock, NEW [298234]
  3/4"Dia, Iemca CH220/37, 12', 1997, Left to Right, 15mm Channels [402462]
  (NEW) .08 - 3/4"Dia, IEMCA Elite 220 Superfast, 12', for Sliding Headstock - NEW [404031]
  (NEW) .118 - 3/4"Dia, IEMCA Ideal 325, 12', for Sliding/Fixed Headstock - NEW [315261]
  LNS Express 220, 1/8"-3/4" x 12', 2004, Right to Left, Sliding headstock [402456]
  LNS Express 220, 1/8"-3/4" x 12', 2013, Right to Left, Sliding Headstock [402458]
  LNS Express 220, 1/8"-3/4" x 12', 2008, Right to Left Sliding Headstock [402459]
  (NEW) LNS Hydrobar Express 220 S2, 1/8" - 3/4" x 12', Sliding Headstock - NEW [399678]
  LNS Hydrobar Express 320, 1/8" - 3/4" x 12', Left to Right Sliding Headstock [402460]
  (NEW) MTA TRACER, 4-20MM x 12, For Swiss Type Sliding Headstock [397494]
  3/4"Dia, Tornos MSL-320, 12', 2006 [325859]
  (NEW) Edge Minuteman 320 SE, .118 - 1" x 12'/6', Sliding or Fixed Headstock, NEW [262803]
  (NEW) 1/8 - 1", EDGE Scout 320, 12', Sliding or Fixed Headstock [394493]
  (NEW) FMB Turbo 2-20, .078" - .787", for Fixed and Sliding Headstock, NEW [303163]
  FMB Turbo 2-20, .078" - .787", for Fixed and Sliding Headstock [400483]
  (NEW) FMB Turbo 3-26, 1/16" - 1" x 12, for Fixed and Sliding Headstock, NEW [287820]
  (NEW) FMB Turbo 3-38, .118" - 1.259" x 12', for Fixed and Sliding Headstock, NEW [303165]
  1"Dia, IEMCA, No. AS325CT/66LL, 20', 2007, [398976]
  .118 - 1"Dia, IEMCA Ideal 325, 12', for Sliding/Fixed Headstock [402686]
  .118 - 1"Dia, IEMCA Ideal 325, 12', for Sliding/Fixed Headstock [403972]
  1/16" - 1"Dia, Iemca Mini Boss 325, 12', 1997, Sliding/Fixed Headstock [402259]
  (NEW) 6mm (.236") - 25mm (1") Dia, IEMCA, NEXT 25, 12', New, Multi Spindle [319943]
  (NEW) 1"Dia, IEMCA, SIR 25, SIR 36 & SIR 52, 12', Multi Spindle, NEW [319944]
  (NEW) 1/8 - 1"Dia, LNS, GT 326-E, 12', Fixed or Sliding headstock [345992]
  1 1/4"Dia, CITIZEN, CAV-32IS, 12', 2007 [404605]
  (NEW) Iemca Mini Boss 338 1/8" - 1 1/2" Dia X 12', Fixed or Sliding Headstock, NEW [261123]
  1 1/4"Dia, LNS Express 332, 6', 2005, for fixed or sliding headstock [392199]
  LNS Hydrobar Express 332, 1/8" - 1 1/4" x 12', 2003, Silding Headstock [403887]
  LNS Hydrobar Express 332, 1/8" - 1 1/4" x 12', 2003, Silding Headstock [403888]
  (NEW) LNS Hydrobar Express 332 S2, 1/8" - 1 1/4" x 12', Silding Headstock, NEW [205258]
  1 1/2"Dia, Edge, No. Patriot 338, 8', 2015 [400313]
  (NEW) Edge Patriot 338, 0.118 - 1 1/2"Dia x 12', Sliding or Fixed Headstock, NEW [292401]
  (NEW) .157 - 1 1/2"Dia, IEMCA, No. IDEAL 438, 12', for sliding or fixed headstock NEW [393377]
  (NEW) .20" - 1 1/2"Dia, LNS Alpha 538, 12', Fixed or Sliding Headstock NEW [335062]
  3/16" - 1-5/8" x 12', Iemca Boss 542, Fixed Headstock, 1998, recond'n by AMR [297753]
  3/16" - 1-5/8" x 12', Iemca Boss 542, Fixed Headstock, 1996 [345352]
  3/16" - 1-5/8" x 12', Iemca Boss 542, Fixed Headstock, 1998, w/ 17mm channel [367078]
  3/16" - 1-5/8" x 12', Iemca Boss 545, 1995 w/ 23mm channel set, sliding/fixed hs [343162]
  IEMCA Prodigy 547, 6', 2007, 1 3/4" round, 1 7/16" Hex, Hydraulic Suspension [343080]
  IEMCA Prodigy 547, 6', 2004, .2"- 1.85" round, .2"- 1.74" hex [344059]
  Edge Patriot 551, 0.196 - 2" x 8', 2011, for Fixed Headstock [402816]
  Edge Patriot 551, 0.196 - 2" x 8', 2010 for Fixed Headstock [402817]
  Edge Patriot 551, 0.196 - 2" x 8', 2011, for Fixed Headstock [402819]
  Edge Patriot 551, 0.196 - 2" x 8', 2011, for Fixed Headstock [402820]
  Edge Patriot 551, 0.196 - 2" x 8', 2011, for Fixed Headstock [402821]
  Edge Patriot 551, 0.196 - 2" x 8', 2010, for Fixed Headstock [402822]
  (NEW) Edge Patriot 551, 0.196 - 2" x 12', for Fixed or Sliding Headstock, NEW [292402]
  (NEW) FMB Turbo 5-55, 5 mm - 44 mm x 12', Fixed Headstock, NEW [287821]
  FMB Turbo 5-55, 5 mm - 55 mm x 12', 2008, Fixed Headstock [401420]
  (NEW) .197" - 2"Dia, IEMCA Boss 552 HD, 12', Fixed/Sliding Headstock, NEW [315252]
  (NEW) .197 - 2"Dia, IEMCA IDEAL 551, 12', for sliding or fixed headstock NEW [403403]
  (NEW) 5mm (.197") - 52mm (2.047") Dia, Iemca PRA 52, 12', NEW [319942]
  (NEW) 2"Dia, LNS Alpha 552, 12', Fixed or Sliding Headstock NEW [335059]
  2"Dia, LNS, No. SPRINT 552 X 12', 2008, fixed headstock, Vertical rack loader [403312]
  (NEW) Hyrdrobar LNS Sprint 565 S2, 1/4 - 2-5/8"Dia x 12', For Fixed or Sliding NEW [297562]
  Hyrdrobar LNS Sprint 565 S2, 1/4 - 2-5/8"Dia x 12', For Fixed or Sliding [401163]
  2"Dia, MTA Eagle 551, 6', 2007, Guide Channels [403075]
  2"Dia, MTA Eagle 551-6, 6', 2011, Channel Guides [402249]
  2-1/8" cap, LNS Hydrobar SPRINT 555 x 12', 2006, fixed Headstock, Vert Rack Feed [403313]
  2 1/2"Dia, Fedek, SN-542, 5' [400893]
  (NEW) FMB Turbo 5-65, 5-65mm (2 1/2" diam) x 12', Fixed or Sliding Headstock, NEW [303663]
  2 1/2"Dia, IEMCA Advantage 66, 5', 2011, for Fixed headstock [344477]
  1/4" - 2 1/2" DIA, LNS ECO LOAD, 5', 2004 [403880]
  1/4" - 2 1/2" DIA, LNS ECO LOAD, 5', 2006 [403881]
  1/4" - 2 1/2" DIA, LNS ECO LOAD, 5', 2003 [403884]
  1/4" - 2 1/2" DIA, LNS ECO LOAD, 5' [403885]
  1/4" - 2 1/2" DIA, LNS ECO LOAD, 5', 2014 [404963]
  .25" - 2 1/2"Dia, MTA Tracer Vs65E, 4', 2012, Remote Control, Sliding Rail Systm [404234]
  (NEW) EDGE Rebel Ecofeed, .196" - 2 5/8"Dia x 4', for fixed headstock [310208]
  (NEW) EDGE REBEL V-65 Servo, .196 - 2 5/8"Dia x 5' or 4', for fixed headstock [310210]
  (NEW) 1/4" - 2 5/8" Dia, LNS Alpha SL65S, 5', For Fixed or Sliding Headstock, NEW [327268]
  1/4" - 2 5/8" x 5' LNS QuickLoad Servo 65, 2007, Length of Spindle [404471]
  3"Dia, ATS, ML580, 5', 2017, for fixed headstock [402489]
  8mm - 80mm (.315 - 3.15") Dia, Edge Rebel 80, 4', NEW [327299]
  FMB SL-80, 10 mm - 80 mm, 2001, Short Type (48), pneumatic feed [397364]
  (NEW) FMB Turbo 8-80, 8 mm - 80 mm x 12', Fixed or Sliding Headstock, NEW [287819]
  0.315" to 3" dia, Iemca, I-Flex-6, Full 6' bars, 2011, rem retract,no changeover [401120]
  (NEW) .197" - 3.150", IEMCA KID 80 PLUS , 5', Fixed Headstock, NEW [393376]
  3" Dia, Iemca Kid 16, 5', 2007 [338261]
  (NEW) 5/16" - 3" x 6', Iemca Master 21, Remnant Retract, Fixed Headstock [403404]
  5/16" - 3" x 6', Iemca Master 21, 2007 [403644]
  5/16" - 3" x 6', Iemca Master 21, 2007 [403648]
  .315" - 3.150" Dia, Iemca Master 880 MP, 12' [401123]
  (NEW) .315" - 3.150" Dia, IEMCA Master 880 HF, 12', for Fixed Headstock - NEW [403406]
  (NEW) 8mm (.315") - 63.5mm (2.5") Dia, IEMCA Master 865 verso, Fixed Headstock, NEW [403405]
  1/4" - 3" Dia, LNS Blaze Air Parts Unloader, 2"-36" Lengths, 2014, XLNT [403314]
  3" Dia LNS Quick Six, 6', 2007, Fixed Headstock, Servo Driven, Pendant [403507]
  1/4" - 3 1/8" x 5', SMW Spacesaver 2000, 1997 [394652]
  (NEW) .315 - 3 1/8"Dia, EDGE REBEL 80 Servo, 5' [345016]
  3 1/8"Dia, HAAS, SERVO 300, 5', 2004 [394518]
  (NEW) 3/8 - 3 1/8"Dia, IEMCA MAESTRO 80 No Limits, 12', for fixed headstock - NEW [403409]
  (NEW) 3 1/8"Dia, IEMCA MASTER Heavy Duty (UP) 12', for fixed headstock - new [403407]
  Iemca Master 880/38/F, 5/16" - 3 1/8" Dia. X 12', 2005 [338306]
  (NEW) 1/4 - 3 1/8" x 5 1/4', LNS Quick Load Servo 80 S2, "NEW" [315924]
  (NEW) 5/16 - 3 1/8" x 6', LNS QUICK SIX S2, for Fixed Headstock, NEW [316027]
  1/4" - 3 1/8"Dia, LNS SPRINT, 12', 1990, vertical rack feed [400563]
  (NEW) LNS Hydrobar Sprint S3, 1/2" - 3 1/8" x 12', Fixed or Sliding Headstock, NEW [302145]
  LNS Hydrobar Sprint S3, 1/2" - 3 1/8" x 12', 2013, Fixed Headstock [403666]
  .315" - 3 1/4"Dia, Ganesh Autobar 80, 5', 2015, Feeds to Right, Remote Control [404233]
  1/2" - 3-1/4" Dia, 1994, LNS Quick Load Servo [397324]
  1/2" - 3-1/4" Dia, LNS Quick Load Servo [399962]
  1/2" - 3-1/2" Dia, 1998, LNS Quick Load, Length of Spindle [345093]
  (NEW) Edge Rebel 102SE, Full Servo, .315" to 4.00" x 5', NEW [288848]
  4"Dia cap, FMB Turbo 20-100, 13', as-new, installed 2018, 90 & 70mm channels [401509]
  4"Dia, MTA Super 100, 5', 2004 for fixed headstock [338263]
  4 3/4"Dia, LNS Quick Load Servo S2, 5 1/4', 2002, Storage Rack, Remote Control [401160]
  1/4" - 4-3/4"Dia, LNS Quick Load Servo S3, 5', 2011, Rear Load, 23" Retract Syst [404958]
  4 3/4" Dia, LNS Quick Load Servo S3, 5', 2012, Rear Load, 23" Retract System [404964]
  (NEW) 1/4" - 4 3/4" x 5 1/4', LNS Quick Load Servo S3 T-L, Fixed or Sliding Hdstk, NEW [341289]
  (NEW) 1/4"-4 3/4"x 5 1/4, LNS Quick Load Servo S3T, Fixed or Sliding Hdstck, NEW [341288]
  LNS Channels for LNS Express 226 or 326 Bar loaders [320232]
  ELECTRICAL PANEL & HYDRAULIC TANK ONLY FOR LNS MINI-SPRINT S2, 1993, S/N 45302 [70560]
  5MM Channel Set for a Tornos SSF-226 Robobar Magazine Type Loader [260982]

0B1430   BEAM/DRILL LINES, N/C & CNC
  JMT offers an excellent unit for your needs, Ask for your Quote Today [396268]

0B1705   BENDERS, PANEL, N/C & CNC
  Ras 70.34, Multibend 9000-2, 126" x 9 Guage, Tooling Included [400401]

0B1804   BENDERS, PIPE, TUBE & BAR
  1 1/4", Pines 3T-M64622, 1986 [338054]

0B1835   BENDERS, PIPE, TUBE & BAR, N/C & CNC
  1", CSM, No. CNC38TSR, [394058]
  4 1/2", CONRAC,Hyd Tube Bender DIGICON 255-SX, DIGICON, 1998, [399309]

0B2754   BLAST CLEANING/AIR & SUCTION
  60 x 48 SL/DBL, TRINCO, 600 CFM Abrasive collector & Filter Cabinet, 2-stations [399141]
  Kramer TB-1, 1 Qt (8 lbs), 18" x 18", Tumble Blast [404389]

0B3052   BLOW MOLDING MACHINES
  (2)IMPCO, No. B-30-R180, 1974, & B-30 DDH, 1984 [341161]

0B5026   BOOMS, LIFT, STRAIGHT, GAS
  30 Ft SELLECK TP-249 1985, Telehandler [403531]

0B5500   BORING MILLS, HORIZONTAL, TABLE TYPE
  4", LUCAS 441B-72, 42" vertical, 72" cross, 50 Taper, 36x74" table [400810]
  4", TOS W100A, 2000, Tail Stock, 23" Facing Head, 49" x 49" Facing Head [403981]
  4", TOS 1970, 49" x 49" Built in Rotary, Tailstock for Line Boring, 23" Facing [403980]
  NOMURA B-85 BT2,Horizontal 4-axis Boring Mill [400432]

0B5751   BORING MILLS, HORIZ., TABLE TYPE, N/C & CNC
  5", CRANE Boring Mill, FANUC 18I, 2008, 98" x 78" x 59", Full B-Axis, 50 HP [394442]
  Awea BL-2018FM, Fanuc 31i, 2012, 78"X, 70"Y, 51"Z, Probe Interface, Chiller [403188]

0B7015   BRAKES, PRESS, Hydraulic (Tons)
  30 Ton, ACCURPRESS 7305, 1997, 5', ETS 100 Control, Variable Speed, [403072]
  40 Ton, 8 Foot, 12" Open Height, 6" Throat Depth [354365]
  66 Ton, JMT PBF2560, 2017, 8' x 66Ton, Delem DA52 Control [396260]
  90 Ton, STRIPPIT PPEB 90/08, 2003, 96" Bed, 15.7" Throat, LVD 4-axis control [395478]
  150 Ton, LVD 165 BH 08N, Tool Clamping, Automatic Crowning [337966]
  150 Ton, WORLD NC 10x150, 2013, 10' x 150 Ton, Delem DA-41, Great Condition [395437]
  160 Ton, Finn B160, 2002, Upper/Lower Clamping, Delem Control [337968]
  165 Ton, PACIFIC J165-12, 1983, 1/4" X 10' Cap, Flush Mount [392311]
  242 Ton x 12', JMT ADS37220, CNC, Delem control, 2-axis back gauge, 10-2" BH [396439]
  JMT offers a full line of Hyd & CNC Press Brakes, Aks for your Quote today [396273]
  Pacific J165-10, 1978, Single Axis Programmable Back-Gauge [337970]

0B8061   BROACHES, VERTICAL, PULL DOWN
  8 Ton, 30"Str, TY MILES, filter, re-circulation, button control [344754]

0C1350   CHAMFERING MACHINES
  (NEW) (New) BAR CHAMP #108-JB-3, 3HP, 360 RPM, 1/2" - 4-1/4" ROUND, 41" BAR HEIGHT [400840]
  (NEW) (New) BAR CHAMP #76-JB-3, 2HP, 360 RPM, 1/4" - 3" ROUND, 41" BAR HEIGHT [291994]
  (NEW) JF BERNS SERVO AUTO CHAMP 2, 0.100" - 3" diameter Range (New) [400841]

0C1678   CHILLERS
  M&W Systems Model RPC260XA Water Chiller System, 90,000 BTUH, fully enclosed [337471]

0C1688   CHIP CONVEYORS
  JORGENSON CHIP CONVEYOR FOR MAZAK QTU-250MY [403505]
  (NEW) LNS Turbo Belt-Type Chip Conveyor - NEW [205248]
  LNS TURBO 44758880, low Discharge off a Star ST-38 [344472]
  LNS TURBO HB52879110 Super Heavy Duty, 2016, Okuma MB4000H [402430]
  Okuma Chip Conveyor, config for Okuma LT-3000 or 99"x15" collection chute [398523]
  TSUBAKI MAYFRAN conveyor off a Citizen L32 [399371]
  OKUMA GENOS L3000E CHIP CONVEYOR [403503]
  OKUMA GENOS L250 CHIP CONVEYOR [403504]
For Star SR20RII, 3 available [404249]

0C1726   CHIP WRINGERS
  (NEW) ChipPac CW-150, 18" x 18" basket, 2 HP, "NEW" [311043]
  (NEW) ChipPac CW-250, 18" x 24" basket, 3 HP, "NEW" [311044]
  (NEW) ChipPack CW-75, 12" x 12" basket, 1 HP, "NEW" [311042]

0C3806   COMPARATORS
  14", Mitutoyo, No. PH-14 [400901]
  S.P.I., 24", Heidenhain ND 1202 Quadra-Check, New scales, New Y-Axis motor/drive [397089]

0C5070   CONTROLS, N/C & CNC
  MITSUBISHI, No. 310LN, Off Nomura SN160, Board, Control Panel [396575]

0C5156   CONVERTERS, SINGLE/3 PHASE, ROTARY
15 HP Rotary Phase converter, Vols 208-230, HZ 60 [398935]
PHASE-A-MATIC, No. CNC PAC 15, 2014, Rotary Phase Converter, [341318]
(NEW) PHASE-A-MATIC, No. CNC PAC 15, 2017, Rotary Phase Converter, [394895]
  PHASE-A-MATIC, No. CNC PAC 30, 2016, Rotary Phase Converter and Voltage Stabiliz [392681]
  PHASE-A-MATIC, No. CNC PAC 30, 2019, Rotary Phase Converter and Voltage Stabiliz [403967]

0C5800   COOLANT SYSTEMS, HIGH-PRESSURE
  (NEW) MP Systems EFO Series, 3 GPM, 1000 PSI (70 Bar), 5u, 2 HP, 200 Lbs [316306]
  2.9 GPM, 1500 PSI, COOLJET 100-10SF, [398169]
  4 GPM, 100-350 PSI, REM REMCOOL 2400, 2HP, with Filter [398175]
  (NEW) ChipBLASTER J-20, 5 GPM, 2000 PSI, 100 Gal. [316295]
  (NEW) 5 GPM, 2000 PSI, MP SYSTEMS V2-O, for CNC Swiss, oil coolant only [392650]
  (NEW) 6.5 GPM, 2000 PSI, COOL BLASTER CB510H, 10 line [394894]
  (NEW) 2,000 PSI, Cool Blaster, CB5120V, 5Line, 7.5 HP, 6.5 GPM, 208/460/3Phase (New) [403845]
  8 GPM, 1000 PSI, CHIP BLASTER M30-70, 2016, low use - like new [403780]
  (NEW) MP Systems R8 Series, 8 GPM / 1000PSI, 2-3 Ports for Oil or Water Coolant [316304]
  (NEW) 8 GPM, 1000 PSI, MP SYSTEMS V2-W, for CNC Swiss, water coolant only [392651]
  (NEW) ChipBLASTER J-30, 8 GPM, 1200 PSI, 100 Gal. [316294]
  (NEW) ChipBLASTER D-30-70, 8 GPM, 1000 PSI, Dual Cartridge Filters, Single Outlet [316281]
  (NEW) ChipBLASTER GV2-80, 3-10.5 GPM, 1500 PSI, 100 Gal, 2 modules [316252]
  (NEW) ChipBLASTER JV-40, 3 - 10.5 GPM, 1500 PSI, 100 Gal. [316251]
  (NEW) MP Systems R16 Series, 16 GPM/1000 PSI, Oil or Water Coolant, 2-3 Ports [316305]
  (NEW) ChipBLASTER J2-60, 2011, 16 GPM, 1200 PSI, 100 Gal., 2 outlets [316296]
  (NEW) ChipBLASTER WV2-120, 6-32 GPM, 1500 PSI, 126 Gal., 2 independent modules [316275]
  (NEW) ChipBLASTER J3-90, 24 GPM, 1200 PSI, 100 Gal., 3 outlets [316297]
  (NEW) ChipBLASTER GV3-120, 31.5 GPM, 1500 PSI, 126 Gal., 3 outlets [316253]
  (NEW) ChipBLASTER WV3-180, 9-48 GPM, 1500 PSI, 240 Gal., 3 outlets [316277]
  (NEW) ChipBLASTER EV-60, 3 - 60 GPM, 1500 PSI, 126 Gal. [316257]
  Hwea 300 PSI, Dual Gundfos Pumps, High Output, 50 Gal., Dual Filtered, Floats [317965]
  1600 PSI, 70 Gal, MP SYSTEMS AT RF, 2015, [399245]
  2000 PSI Water, MP SYSTEM V2, 2016, 4-Line, High Pressure Coolant System [404040]
  (NEW) CHIP BLASTER SWISSBLASTER, 1000-3000 psi, 4 to 8 outlets [399665]
  Citizen A20, Coolant Tank, Can be stand alone unit [402517]
  Citizen A20, Coolant Tank, Can be stand alone unit [402518]
  (NEW) MP Systems RT Series, 8-16 GPM/1000 PSI, Fixed or Variable Flow, 2-3 ports [316303]

0C5901   COORDINATE MEASURING MACHINES (Incl. N/C & CNC)
  25"X, 23"Y, 19"Z, Brown & Sharpe, Micro Excel 765, 2018 [403642]
  Contura G2 Activ, 2013, Calypso Software, Curve, Iges, Vast XT Gold Probe Head [404470]
  NIKON, ALTERA 7.5.5, 2015, Extra probes and Tool Changer included, [394960]
  SHEFFIELD,Cordax D-8 DISCOVERY III, 2009, 20" x 24" x 16", [338348]
  SHEFFIELD, DISCOVERY D28, 2001,30"x36"x20", PH10T Probe, PHC10-2 Controller [403937]
  SHEFFIELD, DISCOVERY II D28, 2001, 30"x36"x20", PH10T Probe, PHC10-2 Controller [403936]
  ZEISS, 60-84-87, Calypso 2017, 7 probes, Fully operating, rebuild candidate [401795]
  Zeiss Contura 7/10/16, 2002, C99 Control, Probe Change Rack, Calibration Sphere [404765]
  Zeiss, O-Inspect 322, 11"X, 11"Y, 4"Z, Discovery Zoom Sensor [403852]
  Zeiss Prismo 9/18/7, 2004, 35"X, 70"Y, 27"Z, C99 Controller [404469]
  ZEISS, VISTA 1620-14, Bridge Type, Renishaw Probe, 3 Axis Vectorial Control [345629]

0C6306   CRANES, BRIDGE & OVERHEAD
  10 Ton, Shaw, Span 30' [402205]
  20 Ton, Continental, Span 20' 1990, 2 10 Ton Hoists, Dual Controls [402203]

0D0654   DEBURRING MACHINES
  No. SB3000, SIMEC, 1997, 4" Capacity, 10' max bar length [310492]

0D0655   DEBURRING MACHINES, CENTRIFUGAL DISC, HIGH ENERGY
  2.7 CuFt TIPTON EFF-105SA, 1996, Semi-Automatic, separation mechanism [396561]
  2.7 CuFt TIPTON EFF-105SA, 1994, Semi-Automatic, separation mechanism [396562]
  2.7 CuFt TIPTON EFF-105SA, 2004, Semi-Automatic, separation mechanism [396565]
  2.7 CuFt TIPTON EFF-105SA PLUS, 2006, Semi-Automatic, separation mechanism [396563]
  2.7 CuFt TIPTON EFF-105SA PLUS, 2006, Semi-Automatic, separation mechanism [396564]

0D3797   DRILLING & TAPPING MACHINES, N/C & CNC
  Brother, M140X1, Brother CNC-C00, 2014, BT-30, 10,000 RPM, Very Low Hours [399870]
  BROTHER, No. TC-S2D, B00, 2009, Nikken Dual spindle 5-Axis Trunnion, Tool Setter [394557]
  BROTHER, No. TC-S2DN, B00, 2012, 10k RPM, Nikken 5 Axis Trunnion, 14 ATC [394559]
  BROTHER, No. TC215, BROTHER, 1990, BT-30, 10000 RPM, 10 ATC [395177]
  Brother TC-31A, Brother A00, 2 Pallets, (2) Nikken 4th Axis Rotary Tables, [393794]
  BROTHER,TC-S2A0,CNC-A00, 2000, 27"x14"x10" travel, BT30, 14 pos turret, 10K rpm [393598]
  Brother TC-S2C-0, Brother, 2006, 31.5" x 12.6", 5-Axis Trunnion, Fanuc Robot [403514]
  Fanuc Alpha T14iA, 1997, Fanuc 0iM, 20"X 15"Y 12"Z, 14 ATC [403803]
  Fanuc Trode Master, T14iB, 2000, Fanuc 16iM, 20"X 15"Y 12"Z, 7.5 HP, 15000 RPM [403435]
  Fanuc Robodrill D14MIB5, Fanuc 30I, 2018, 4th Axis Rotary Table [403282]
  FANUC, No. ROBODRILL T21IFL, FANUC 31, 2008, APC, PROBE [404810]
  FANUC, No. ROBODRILL T21IFL, FANUC 31, 2008, APC, PROBE [404811]
  Fanuc Robodrill D21MiA5, Fanuc 31iB5, 2013, Robotic Work Cell, 24,000RPM [402110]
  Fanuc Robodrill, No. T-21IEL, Fanuc 31i Series A5, 2005 [403902]
  FANUC,Robodrill Alpha T14IFA, FANUC 31LIA5, 2011, 10k rpm, LOW HOURS [394602]
  Fanuc Robodrill Alpha T21iF, Fanuc 31iA5, 2010, 10,000 RPM, BT-30 [404627]
  Fanuc Robodrill a-D21LiA5, Fanuc 31i-B5, 2016, Tool Setter, Rigid Tapping [404291]
  20.08"X, 16.93"Y, 12.99"Z, Ganesh Genmill T-500, Mitsubishi M80, 12,000 RPM [403964]
  20.08"X, 16.93"Y, 12.99"Z, Ganesh Genmill T-700, "New", Mitsubishi M80, 12K RPM [403954]
  Haas DT-1, Haas, 2011, 4th Drive w/ Indexer, 15k RPM, Rigid Tap, Auger, Probing [401240]

0D4554   DRILLS, GUN
  1/4", 12", PRECIHOLE, No. GVN 06M/2-300, 2014, (2) Gun Drills for 1mm and 2mm [346087]
  1/2", 18", DADSON, No. DS518-CM, 1996, High Pressure, Ball Screw Feed, 2 HP spin [395049]
  Upto 1.375"x 30", DADSON, #DS (6)1030-BTA, 1999, 4-spindle servo drive, HPC [398263]
  1 1/2", 40", TECHIDRILL, No. BTA-1.625-50-1A-40-DS, 2002, 2 Spindles, 30HP [341933]

0D5700   DRILLS, RADIAL
  4' x 12-5/8", OOYA, #RE-1225H, 38-1985 RPM, #5MT, 5HP [396326]
  5' x 11", GIDDINGS & LEWIS, Model UL7120A, Coolant Pump, 1962, Power Feed, [340748]

0D5750   DRILLS, RADIAL, N/C & CNC
  Carlton 4A, 2019, 6MT Taper, 25 HP, 20" Travel [403098]

0D7504   DRYER-BLENDERS
  Patterson Kelly, 5 CUFT, Stainless Steel, Twin Shell V-Blender [345590]

0D8300   DUST COLLECTORS
  (NEW) New ROYAL FX-300 Filtermist, 295 CFM for machines up to 80cubic feet [338667]
  (NEW) 355 CFM, ABSOLENT A-mist 6C, (replaces ODF 800) [333226]
  (NEW) NEW MISTBUSTER 500, MIST & SMOKE COLLECTOR, 500 CFM, ELECTROSTATIC (<800 psi) [207039]
  (NEW) 560 CFM, Royal Products FX-575 Filtermist, new [345014]
  (NEW) 590 CFM, ABSOLENT, A-mist 10C Oil Mist Filter (replaces ODF 1000C) [333227]
  (NEW) New Mistbuster 850, Mist & Smoke Collector, 850 CFM, Electrostatic [286747]
  (NEW) NEW TRI-MIST 850 G2 Mist and Smoke Collector [345997]
  TRI-MIST 850 G2 Mist and Smoke Collector [404749]
  TRI-MIST 850 G2 Mist and Smoke Collector [404758]
  TRI-MIST 850 G2 Mist and Smoke Collector [404759]
  TRI-MIST 850 G2 Mist and Smoke Collector [404760]
  850 CFM, TRIMIST 850, [404761]
  (NEW) (NEW) 900 CFM, ROYAL PRODUCTS, No. FX-900, [314717]
  (NEW) MistBuster Infinity, Mist & Smoke Collector, 500-1000 CFM, Media Collection -NEW [261142]
  (NEW) MISTBUSTER 2000, Mist & Smoke Collector, 1650 CFM, Electrostatic, NEW [315000]
  2600 CFM, CAMFIL, Handite Oil Expert 4.5, 2015, Coolant or Oil Mist/Smoke Cllctr [398404]
  7900 CFM, CAMFIL, Handite Oil Expert 13.5, 2015 Coolant or Oil Mist Smoke Cllctr [398402]
  13200 CFM, Donaldson-Torit, Dryflow DMC-D6, 2001, [403760]
  (NEW) EDGE, Vortex Oil Mist Filtration Systems, 475 CFM to 1700CFM [400631]
  (NEW) LNS WS-Series, 5 models: 169-1248CFM, pre-filter/centrifugal/ext'd filter [310750]

0E2400   ELECTRIC DISCHARGE MACHINES, CONVENTIONAL, RAM TYP
  Agie Spirit 2, 2005, 11"X, 9"Y, 9"Z, 15" x 11" Table [403099]
  Chevalier Falcon ED-252, 1989, 30amp, Anilam DRO, RAM EDM, Inexpensive [399031]
  MAKINO EDAF3, 60 AMPS, MGH6, 2016 [404678]
  MAKINO EDNC43, 1993 [404392]
  MITSUBISHI, No. V35F, 35 Amp, 1994, CNC Control C11G35 [394961]
  SYSTEM 3R WORKPAL, 1998, 16 3R macro Pallets [296803]

0E2450   ELECTRIC DISCHARGE MACHINES, SMALL HOLE
  GANESH, LSD-20 EDM DRILL, 2014, as-new, 30 Amps ,17 3/4" x 8 1/4", 2-axis DRO [404529]

0E2475   ELECTRIC DISCHARGE MACHINES, WIRE, N/C & CNC
  Charmilles Robofil 500, Charmilles, 1994, Power Z Axis, Isopulse Generator [400308]
  MAKINO U1310, Hyper 1, 2010, 5-axis, Trvls:51.57 x 39.76 x 24.41"; auto thread, [399942]

0F0504   FANS
  17500 CFM, Polar Cool, No. PLC66221300, 48", 4,000 Sq Ft Cooling, 240 Volt [400900]

0F1650   FINISHING MACHINES
  Sintobrator Ltd. #VF-P Vibrating Barrel Finishing Machine [297357]

0F1925   FLAME CUTTING EQUIPMENT, N/C & CNC
  Koike Aronson Mastergraph MGM 3100, 15' x 50', 200 Apm Plasma [404562]

0F2798   FOLDING MACHINES
  FASTI FP60 20/6, 2006, 19.70" Clamping Stroke, 80" Working Length, 1/4" Max [395917]
  (NEW) JMT/FINTEK VH-1010-6HC, 2017, Hydraulic bend plate, NC Control, [395870]

0F3275   FORKLIFTS, TELESCOPING BOOM
  3500 Lb., Caterpillar TB35, 144" Mast, TILT, FLL Mast [400899]

0G1103   GEAR HOBBERS, HORIZONTAL, NC & CNC
  WMW ZFWZ08, Fanuc 15M, Tailstock, Conveyor [337965]

0G2804   GENERATORS, A.C., NATURAL GAS, DUAL FUEL, HEAVY FU
  2016 Cryomech LNP20 Nitrogen Generator system, As-New, 20 L/dy [394293]

0G3975   GRINDERS, BELT
  36", AEM 501-37MD, Electric Eye Tracking, 6" Contact Wheel Size [345263]
  36", RAMCO 37T/2, Wide Dual Head Belt Sander, Wet [345248]
  37", CEMCO 2000,Belt/Brush, Wet, Dryer, Eye Tracking,15-45 FPM [345237]
  37", CEMCO 2000,Single head,Belt, Wet, Eye Tracking,15-60 RPM,pneumatic tension [401077]
  37", TIMESAVERS 137-1HDMW, WET BELT, 20 HP, COOLANT SYSTEM [395830]
  37", WEBER/AEM OFZ-1, Single Head Dry Type, Dust Exhaust Connections [345249]

0G4306   GRINDERS, CENTERLESS
  No. 1050A, SMTW, Auto Infeed, .02"-2" Range, Mitutoyo DRO, Parts Ejector [367017]
  No. M10200, SMTW, 8" Capacity, 24" G-Wheel, 15.7 R-Wheel, In & Thru Feed [345040]
  No. PARAGON, RC-12, 12" Wheel, 7.5 H.P, 1.58" Capacity [350986]
  Royal Master TG12x4, 1983, .004-1.5" Cap., 10-12" Grinding wheel, 4-6" Reg. Whl [404210]

0G4315   GRINDERS, CENTERLESS, N/C & CNC
  GLEBAR PG-9CRG, 2011, PLC, 2"dia cap, Grinding wheel 9" x 12-5/8", Plunge Form [401816]
  GLEBAR PG-9CRG, 2010, PLC, 2"dia cap, Grinding wheel 9" x 12-5/8", Plunge Form [401817]
  GLEBAR PG-9CRG, 2010, PLC, 2"dia cap, Grinding wheel 9" x 12-5/8", Plunge Form [401815]

0G4550   GRINDERS, CURVIC COUPLING
  Gleason 887 Big Bore, Fanuc 18MB, 60" Dia., 6" - 21" Wheel Dia [404092]

0G4601   GRINDERS, CYLINDRICAL, N/C & CNC
  8"x12", TSCHUDIN PL24, 2019 Mach Motion CNC Retrofit w/ warranty [401759]
  8" x 20", OKAMOTO, No. OGM-820U, 1991, FANUC OKAMOTO PRECISION CONTROL [393165]
  12" x 20", STUDER, No. S 36 CNC, 2001,Fanuc 16T [399669]
  12" x 24", Schaudt AR, Auto Infeed, Motorized Head/Center [338037]
  12" x 25.5", Jones & Shipman, Ultramat 650 Easy-E, 2006, Fanuc, 3-Wheel, B-Axis [341458]
  12 5/8" x 39 5/8", TOYODA, No. G-100 II, 2012 [398312]
  14" x 40", Jones & Shipman Format 1000M, New Controls, Swivel Wrkhd, Univ whlhd [402482]
  14" x 40", Kellenberger UR 175/1000, 1997, Kelco CNC Control or full RETROFIT [401767]
14" x 40", Newer Controls, Swivel Wrkhd, Univ Wheelhd [403797]

0G4750   GRINDERS, CYLINDRICAL_PLAIN, ANGLE HEAD
  12" x 40", TOYODA, No. GUP28-100, 1990 [398389]

0G4765   GRINDERS, CYLINDRICAL_PLAIN, ANGLE HEAD, N/C & CNC
16" x 32", WELDON, No. 1632 [344118]

0G7933   GRINDERS, SURFACE, CREEP FEED
  6" x 14", OKAMOTO, No. L6.12, High Precision Hand Feed Surface Grinder [403429]
  MILWAUKEE, Surface Grinder Model H [341691]

0G7960   GRINDERS, SURFACE, N/C & CNC
  BROWN & SHARPE, No. MICROMASTER 824, VARIABLE, 2 Axis, Hydraulic Table [345355]
  Chevalier FSG-1632ADII, 2007, Variable Speed Drive, Auto Grinding, Sony DRO [404732]
  CHEVALIER, No. FSG-3A818, 3 Axis Hydraulic, Variable Feed, 5 hp [402674]
  CHEVALIER, No. FSG-818AD, [338884]
  Chevalier FSG-1640 AD, 1998, Wheel Dresser, Electromagnetic Chuck [338011]
  Okamoto 124N, 1990 [338713]
  Okamoto 1632N, 1988, 15" x 33", Sony DRO, Dresser, Walker Electro-Magnetic Chuck [402923]
  Okamoto ACC-20.40EX, Fanuc, 2000, Auto Dresser, Transformer, Wheel Adapter [402924]
  Okomoto ACC-1224DXV, 1998, Programmable Downfeed, Auto Crossfeed, Magnetic Chk [404731]

0G8025   GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.)
  6" x 12", Harig Surface Grinder [402260]
  10" x 20", Acer Supra-1020AHD,Incremental Dwnfd.,5HP.,Microprocessor Ctrl.,2011 [392631]
  10" x 20", KENT KGS-1020AHD, 2006,Auto Down-Feed [399919]

0G8500   GRINDERS, TOOL & CUTTER
  Brown & Sharpe #13, 8" x 14", Live/Dead Headstock, Collet Attachment [404268]

0G8507   GRINDERS, TOOL & CUTTER, N/C & CNC
  EWAG, No. EWAMATIC, NUM NUMROTO 1060II, 1999, 12k RPM, Robot loading, [392268]
  EWAG, No. EWAMATIC LINE, NUM CNC, 1999, Fire Suppression, Robotic Loading Cell [394651]
  STAR, No. ATG-6AC, FANUC 160, 1999, Glass scales on linear, part probe, [395694]

0H3250   HEAT TREATING UNITS, INDUCTION HEATING
CRESS, No. C136/942, [394315]

0H5975   HONES, HORIZONTAL
  EC3500, SUNNEN, 1999, power stroke, Auto Size, vari-feed, rough finish, comp [399272]
  MBC-1803D Sunnen, 0.060"-3.75", '95, Power Str, Autosize, Stone Saver [399196]
  MBC-1803D Sunnen, 0.060"-3.75" Dia, 16" Str, Power Str, Autosize, tooling [399199]
  Sunnen Hone MBC-1802, 2,500 RPM [404638]

0I4604   INJECTION MOLDING, HORIZONTAL/VERTICAL
  30 Ton, 1.4 Oz., SUMITOMO, 1998, [345030]
  35 Ton, 3.2 Oz., Battenfield 350V/200H-C, 1987, Unilog 4000 [336331]
  50 Ton, 1.29 Oz., AUTOJECTOR, 1995, [345033]
  55 Ton, 2.3 Oz., Engel ES200/55, 1992, EC 88, Manuals [336269]
  1999 Van Dorn Demag 270 HTG-1220, 270 Ton, 20 oz, NC 4 Control, Floppy Drive [404133]
  450 Ton, 60 Oz., VAN DORN, 450-RS-60, [392704]

0L0275   LABORATORY & RESEARCH EQUIPMENT
  48804-00, LABCONCO, Laboratory Fume Hood 48"w x 32"d [396143]
  Dan Laf HF914 Laminar Air Flow, 2002, Vertical Opening: 50"w x 85"H x 36"D [393574]

0L0850   LASERS
  A&M is a Distributor for NEW Bodor Lasers [403704]
  Trumpf Trulaser 2025, 2008, 4' x 10', Siemens, Robotic Load/Unload [399595]
  TRUMPF TRULASER 2030, 2007, 120"X, 60"Y, 4.5"Z, Siemens 840D, Chiller [394816]

0L2125   LATHES, CHUCKING, N/C & CNC
  Ganesh Cyclone 32GT, 1-1/4", 2006, 6000 RPM, 11" X, 6.5" Z, Parts Catcher [400896]
  GANESH, Cyclone 32GT, FANUC 0iTC, 1 1/4", 2006, 8-Station Turret [403749]
  GANESH CYCLONE 32GTS, SUPER 900, 1-7/16", 2008, DBL Gang-tool, Dual Spindle [399106]
  GANESH CYCLONE 32GTS, SUPER 900T, 1-7/16", 2012, DUAL Gang-tool, Dual Spindle [400358]
  Hwacheon Hi Tech 550A, FANUC 18iTB, 2008, 24"Chk [341374]
  KENT, No. CNL-1760, ANILAM 4200T, 8"Chk, 2", 2001, Tail Stock, Gang Tool [394092]
  MORI SEIKI, No. SL-7A, 20"Chk, 1982, Tail Stock, 64" Z-Axis, [397390]
  MORI SEIKI CL-05, MSC-801 Control, (2)4" 3-Jaw Chks, 2", 1996, Auto Chuck Chgr [343007]
  Techno Wasino G6, Fanuc 21I-T, 4"Chk, 1 1/2", 2000, Robot Loader/Unloader [404076]

0L2150   LATHES, COMBINATION, N/C & CNC
  ALMAC/TORNOS PB700, Fanuc O1MD, [396464]
  1-5/8", Citizen FL42IV, Mitsubishi, 2005, Iemca Loader,Tooling [400726]
  Clausing CKE6140Z, Fanuc 0iTC, 8"Chk, 2007, Collet Chuck, Tailstock [402568]
  DAEWOO PUMA 200LMSA, FANUC 18T, 2", 1999, Tool Pre, Sub, Full C, Live [403675]
  Daewoo Puma 350LMA, Fanuc 18T, 15"Chk, 3 1/2", 1998, Tailstock, Tooling [402197]
  Daewoo Puma TT-1800SY, Fanuc 18iT, 2 1/2", 2006, Barfeed, Full C, HPC [403694]
  Daewoo Puma 2000SY, Fanuc, 2 1/2", 2002, Tailstock, LNS Quick Load Servo S2 [403641]
  Daewoo Puma 250MS, 10" Chk, 3", 1998, Fanuc 18T, Sub Spindle, Live Tools [404354]
  DMG Mori SPRINT 65, 2 1/2" SPNDL, B/F, [403925]
  DMG Mori Seiki DuraTurn 2550MC, MSC-504IV, 10"Chk, 3", 2010, Tailstock,Presetter [404199]
  DMG Mori Seiki NLX-2500/1250, Celos, 10"Chk, 3", 2018, Tailstock, Presetter [404193]
  DMG MORI SEIKI NZX 1500/800SY, FANUC31IB, 2", 2016, twin turret, C, live [403679]
  DMG Mori Seiki Speed 20-11 Linear, Fanuc 160iTB, 1", 2014, Sub, Tooling, C-Axis [404196]
  DMG Mori Seiki Sprint 20-8 Linear, Fanuc 310iS, 1", 2011, Live Tool, Barfeed [404198]
  DOOSAN 240 MSC, FANUC 18ITB, 3", 2007, LNS QL Servo S2, Live Tool, Sub, parts [403678]
  DOOSAN LYNX 220LYC, FANUC, 8"Chk, 2016, Y-Axis, Live Tool [404039]
  Doosan Puma 3100XLY, 12"Chk, 4", 2012, Fanuc, Tailstock, Presetter, Y & C Axis [404692]
  DOOSAN PUMA 2100, FANUC, 8"Chk, 2 1/2", 2012, Tail Stock [403892]
  DOOSAN PUMA 2100SY, FANUC 31IA, 8"Chk, 2 1/2", 2011, Y-Axis, Live Tool, Full C [404698]
  Doosan Puma 240B, Fanuc i, 8"Chk, 2 1/2", 2005, Tailstock, Presetter [400180]
  Doosan PUMA 240C, FANUC 21TB, 8"Chk, 2 1/2", 2004, Chip Conveyor, Tail [403695]
  DOOSAN PUMA 240MC, FANUC 21I-TB, 10"Chk, 3", 2006, Live Tool, Full C, [403677]
  DOOSAN PUMA 2600SY, FANUC 31I-B, 10"Chk, 3 1/4", 2015, Y-Axis, Live Tool, Sub [404699]
  DOOSAN PUMA 280LM, FANUC 21ITB, 12"Chk, 3", 2006, LIVE TOOL, TAILSTOCK [404669]
  DOOSAN PUMA 300C, FANUC 21IT, 12"Chk, 4", 2007, Tail, Tool Setter, Chip [403165]
  DOOSAN PUMA 300LC, FANUC 21I-TB, 12"Chk, 4", 2008, Presetter, Prog Tail, [403713]
  Doosan Puma 600-LY, Fanuc 32i, 21"Chk, 4 1/2", 2017, Live Milling, Tailstock [402108]
  DOOSAN PUMA GT2100, FANUC, 10"Chk, 2", 2014, TAILSTOCK, CHIP CONVEYOR [404916]
  DOOSAN PUMA GT2100, FANUC, 10"Chk, 2", 2014, TAILSTOCK, CHIP CONVEYOR, BARFEED [404917]
  Doosan Puma TT-1800SY, Fanuc 31iB, 8"Chk, 2 1/2", 2018, Y&C Axis, Barfeed [404397]
  Doosan S310N, Fanuc 0iT, 2-5/8", Tailstock, Tooling [404629]
  EMCO HYPERTURN 665MC,FANUC 18iTB,2 1/2",2009,BarFeed,Live,Dual Spindle/Turret [402896]
  EmcoTurn 332MC Plus, Seimens, 2001, 8.6" Swing, 6.3"X, 5.5"Y, 20"Z, Barfeed [403009]
  Eurotech 710SLL, Fanuc 18iT, 8"Chk, 2 3/4", 2000, Sub Spindle, HPC, Mist Collctr [401070]
  Eurotech 735SLY, Fanuc 32i, 2 3/4", 2011, LNS BF, Chip Conveyor [402853]
  Eurotech B446/Y2, Fanuc, 2", 2010, 8-axis, Dual Turrets, Spindles & Y-Axis [402795]
  Eurotech B446/Y2, Fanuc, 2", 2011, 8-axis, Dual Turrets, Spindles & Y-Axis [402796]
  Eurotech B750-LSY, Fanuc 32iT, 12"Chk, 3 1/2", 2016, Live Tooling, Presetter [404190]
Emco Maier Emcoturn 320, Fanuc 0T, 3 3/4"Chk, 1 1/8", Tailstock, Collet Chuck [328367]
  Femco HL-55S, Fanuc Oi-TD, 15"Chk, 4 1/2", 2000, Programmable Tailstock, Conveyr [404691]
  Ganesh 4212, Fanuc 0iTD, 2005, 6"Chk, 1 5/8", 12 Pos Turret, Tailstock [400898]
  Ganesh ASL-15M, Mitsubishi M80, 2016, 15"Chk, 4", Tailstock, Demo/Used [404320]
  Ganesh Cyclone 32CS, 2013 (deliv 2014), 1.25" cap, 11-live, gang tool, sub spind [401134]
  2 3/4" Ganesh Cyclone 70TTMY, Mitsubishi M720, 10"Chk, 2013, Full Y & C Axis [401296]
  2 3/4" Ganesh Cyclone 70TTMY, Mitsubishi M700, 2013, Live Milling, HPC, Barfeed [404784]
  Ganesh, GenTurn 52BY2, MITS M720, 2", MillTurn, 9-Axis, B-Axis, Double Y-Axis [402251]
  Ganesh GenTurn 78MSY, Mitsubishi M720, 10"Chk, 3", True Y & C Axis, 16 turret [403736]
  Ganesh Genturn-52TTMY, 2015, 6"Chk, 2", Twin Spindle/Turret, Live tools, sub [404889]
  Ganesh GT-1840CNC, 2016, Fagor 8055TC, 10"Chk, 2-3/8", 18" x 40", as-new [403801]
  Ganesh GT-3880, Fanuc Oi-TD, 14", 2013, Tailstock, Steady Rest [400970]
  Ganesh GTK-2050, Fagor, 10" chk, 3-3/8" hole, 2011, 20" x 49" cc [400623]
  "NEW" GANESH GTK-2050, FAGOR 8055TC, 2014, 3.15" Bar Capacity, 10" 3-Jaw Chuck [343684]
  Ganesh GTW-3060BB, Fanuc Oi-TD, 10"Hole, 2013, Tailstock, 2-chucks, Steady Rest [401039]
  GANESH KSL-7612TMY, 2012, Fanuc, 10"Chk, 3" hole, live tool, Y-axis, 12 Tool pos [392959]
  Ganesh KSL-7612TMY, 2011, Mits M70, 10"Chk, 3" hole, 12 pos trret, Y-axis [400995]
  "NEW" GANESH KSL 7612TMY, MITS M70L, 2014, 17" Swing, 21" Turning [343679]
  "New" GANESH KSL-7610T, FANUC, 10"Chk, 3", 2014 [340456]
  Ganesh GTW-3060BB, Fanuc Oi-TD, 10"Hole, 2013, Tailstock, 2-chucks, Steady Rest [401040]
  GILDEMEISTER CTX 410, FANUC 320is-A, 2 1/2", 2007, Live Tool, C Axis, Tail [404000]
  GILDEMEISTER MF TWIN 42Y, SIEMENS 840D, 4", LNS QLServo S2 BF [403340]
  Gildemeister,Sprint 65 Linear, Siemens-840D, 7"Chk, 2 3/4", 2008, [403970]
  Haas DS-30SSY, Haas, 10"Chk, 3", 2011, Dual Collet Chucks, Presetter [401303]
  Haas DS-30SSY, Haas, 8"Chk, 2", 2013, Y-Axis, Sub Spindle, Live Tool, Presetter [404176]
  HAAS SL-10, HAAS, 6"Chk, 1 3/4", 2002, 6,000 RPM's, Tool Presetter, Auger [400921]
  HAAS SL-10, Haas, 6"chk,2007,Servo Bar 300, no tlstk [404225]
  Haas SL-20, Haas, 8"Chk, 2000, Tailstock, Tool Eye, Tooling [400886]
  Haas SL-20T, Haas, 8"Chk, 2", 2006, Tool Setter, Chip Auger, 5C Collet Adaptor [403828]
  Haas SL-40TL, Haas, 15"Chk, 2007, Live Tooling, C-Axis, Presetter, Tailstock [403586]
  Haas SL-20T, Haas, 8"Chk, 2", 2008, Servo Bar 300, Tailstock, Presetter, Auger [403066]
  Haas SL-20T, Haas, 8"Chk, 2", 2008, Servo Bar 300, Tailstock, Presetter, Auger [404886]
  Haas SL-30T Haas, 3", 2002, Auger, Tailstock, 40 GB Drive [401841]
  Haas SL-30 Haas, 3", Chip Conveyor, Servo 300 Barfeed, Parts Catcher [403855]
  Haas SL-40T, Haas, 15"Chk, 4", 2004, Tailstock, Presetter, Live Tooling, C-Axis [404156]
  Haas SL-40T, Haas, 15"Chk, 4", 2004, Tailstock, Presetter, Live Tool, C-Axis [404159]
  Haas ST-20, Haas, 8"Chk, 2", 2017, Chip Conveyor, Parts Catcher, Mist Collector [402685]
  3", Haas ST-30, Haas, 10"Chk, 2010, Chip Conveyor, Parts Catcher, Servo 300 B/F [403856]
  Haas ST-30SS, Haas, 10"Chk, 3", 2011, Tailstock, Presetter, Rigid Tap, Holders [400987]
  Haas ST-30SSY, Haas, 10"Chk, 3", 2013, Tailstock, Presetter, Rigid Tap, Y-Axis [401236]
  Haas ST-35, Haas, 12"Chk, 4", 2015, Conveyor, Rigid Tapping, Tailstock [404131]
  Haas ST-35Y, Haas, 12"Chk, 4", 2016, Y & C Axis, Conveyor, Tailstock, Live Tool [404161]
  Haas TL-1, 2006 [403995]
  Haas TL-15, Haas, 2", 1999, Live Tooling, Presetter, Sub Spindle, 8" Chuck [400953]
  HAAS TL-2, HAAS, 12"Chk, 2 1/2", 2010 [395602]
  Haas TL-2, Haas, 10"Chk, 2006, Tailstock, 1,800 RPM [403309]
  Haas TL-25, Haas, 2006, 3" hole, collet ck/3jaw on Sub Spindle, Barfeed, Presetr [402196]
  HARDINGE CONQUEST GT-super precision, FANUC 18T, 1-1/16", 1997, Hyd bar feed [402369]
  Hardinge Conquest T42SP, Fanuc 18T, 1-5/8", 1997, Tlsck, Tooling, Hardinge B/F [401567]
  Hardinge Elite 27MS, Fanuc 18iTB, 1", 2007, 5C Collet, Full C Main/Sub [402968]
  HARDINGE QUEST 8/51, FANUC 21I-TB, 2", 2008, Y-Axis, Live, C-Axis [403710]
HYUNDAI HIT 185, SIEMENS, 8"Chk, 2 1/2", 1988, [398696]
  HYUNDAI KIA SKT 460, FANUC 21ITB, 15"Chk, 4 1/2", 2006, [401161]
  Johnford SL-500A, Fagor 8060T, 12"Chk, 4", 2018, Live Tool, Barfeed, Toolsetter [404129]
  L&L LS 1000X900, Fanuc, 32"Chk, 2010, 2 Chip Conveyors [404496]
  MAZAK INEGREX 200IIIST, FUSION 640MT, 2", 2003, B-Axis Milling Head, HP, Iemca [402880]
  Mazak Integrex 200-3ST, Mazatrol 640MT, 8"Chk, 2", 2003, Chip Blaster, 40 ATC [400680]
  Mazak Integrex i300S, Matrix 2, 10"Chk, 3 1/4", 2012, Live Milling, Full C-Axis [404985]
  Mazak Integrex 2003ST, Mazatrol 640MT, 2", 2004, Collet Chuck, Iemca Bar Loader [402573]
  Mazak Integrex i100S, 6"Chk, 2" Dia., 2015, Chiller, C-Axis, Chip Conveyor [404269]
  MAZAK MULTIPLEX 6200Y, 10"Chk, 1998 [398954]
  Mazak SQT-18MS, Mazatrol, 10"Chk, 2 1/2", 1996, SMW Spacesaver, Presetter [402209]
  MAZAK SQT18MSYII, MAZATROL TPLUS, 10"Chk, 2 1/2", 1997, Very Clean, Tooling [403471]
  Miyano ABX-51TH2, Fanuc 31ITA, 6"Chk, 2", 2009, Tool Setter, HP Coolant [400749]
  MIYANO BNC42A, FANUC 21T, 1 5/8", 1999, TAILSTOCK [394998]
  Miyano BND-51S, Fanuc 21, 6"Chk, 1999, 2" Bar Cap, 20" Swing, Iemca Barfeed [400237]
  MIYANO BND 51SY, FANUC, 2", 2004, HP, Parts Catcher & Conveyor, LNS [403681]
  MIYANO BND-34C3, FANUC 0T, 1997, 1 5/16", LIVE TOOLS, IEMCA BOSS 542 BARFEED [393175]
  MIYANO BND-34S, FANUC 18T, 1 5/16", Live tooling, Sub, Parts Catcher [394958]
  Miyano BND-51SY, Fanuc, 6"Chk, 2", 2004, Live Tools, HPC, LNS Bar Loader [402951]
  Miyano BNE-64SY2, Fanuc 18iTB, 8"Chk, 2.57"cap, 2005, 2-turret, Y-axis, sub Spdl [401203]
  Miyano BNJ-51SY3, 6" Chk, 2" Dia., FMB Turbo 5-55, Tooling [404318]
  Miyano BX26S, Fanuc 18i-TB, 1", 2006, Sub Spindle, 8,000 RPM, Iemca Loader [402390]
  Miyano BX26S, Fanuc 18i-TB, 1", 2006, Sub Spindle, 8,000 RPM, Iemca Loader [402392]
  Miyano BX26S, Fanuc 18i-TB, 1", 2009, Sub Spindle, 8,000 RPM, Loader [402473]
  Miyano BX26S, Fanuc 18i-TB, 1", 2008, Sub Spindle, 8,000 RPM, Loader [403622]
  MIYANO LM-11, FANUC 0TT, 6"Chk, 1993, 4.75" TURNING, 6" SWING, 6X2 POS TURRET [400751]
  MORI SEIKI DL-15, FANUC 16T, 6"Chk, 2", 1994, Twin Turret, Twin Spindle [341200]
  MORI SEIKI MT2000A1S, MSG501, 2 1/2", 2003, B-axis mill-turn, 21x40"cc; 40 ATC [398858]
  Mori Seiki NL-2000Y, MSX-850, 8"Chk, 2 1/2", 2005, Tailstock, Presetter [404213]
  MORI SEIKI NL3000/1250,2006, MSX 850II, 12"Chk, 3 1/2",Programmable Tail stock [403071]
  MORI SEIKI NL3000Y/1250, MSX850III, 15"Chk, 3 1/2", 2008, LNS Steady, Rebel 102 [403225]
  Mori Seiki NLX2500/700, Mapps IV, 3", 2012, HPC, 10" Chk, Presetter, Collet Chk [403187]
  MORI SEIKI NLX2500SY, CELOS, 10"Chk, 3", 2017, Less than 100 hours [403676]
  MORI SEIKI NT3200/1000SZ, MSX-711, 2 1/2", 2006, 12k Milling Spindle, 80ATC [403249]
  MORI SEIKI NT5400/1800SZ, 15"Chk, 4", 2007,5-Axis,Live Tool,Probe,Sub,80ATC [403248]
  Mori Seiki SL4C, Fanuc 10T, 12"Chk, 4", 1987, Tailstock, Chip Conveyor [400074]
  MORI-SEIKI SL2500MC650 (3AXIS)2003,10",tailstock,tool eye,live tools,chip conv. [400536]
  Mori Seiki SL-204SMC, MSG-805, 8"Chk, 2 1/2", 2001, Sub Spindle, C-Axis, Robot [404216]
  Nakamura WY250L, Fanuc 31i, 8"Chk, 2 1/2", 2013, LNS QL S3, Presetter, HPC [402631]
  Nakamura Tome 300WT-MMSY, Fanuc 18iTB, 2 1/2", 2005, Y & C Axis, Barfeed, Sub [404192]
  NAKAMURA TOME AS200LYS, FANUC, 10"Chk, 2 1/2", 2017, Y-AXIS, SUB-SPINDLE, B/F [404666]
  NAKAMURA TOME AS200LYS, FANUC, 10"Chk, 2 1/2", 2016, Y-AXIS, SUB-SPINDLE, B/F [404667]
  NAKAMURA TOME SUPER NTM3, FANUC 16I-TB, 2 1/2", 2010, 3 Turret, Sub, Y-Axis [402871]
  Nakamura Tome Super NTM3, Fanuc 16iTB, 2", 2010, Dual Spindle, Barfeed, HPC [401496]
  NAKAMURA TOME SUPER NTMX,FANUC 31IA5,6"Chk,2",2012,HP&TSC Coolant,Mist,Probe [402882]
  NAKAMURA TOME SUPER NTMX,FANUC 31IA5,6"Chk,2",2012,HP&TSC Coolant,Mist,Probe [402883]
  Nakamura Tome Super NTX, Fanuc 16iTB, 8"Chk, 2 1/2", 2003, Barfeed, Mist Collec. [400514]
  Nakamura Tome TW-20MMY, Fanuc 18ITB, 8"Chk, 2 1/2", 2003, Sub Spindle, Y-Axis [400513]
  Nakamura Tome WT150II, NT Smart X, 2", 2017, Live Tool, Sub-Spindle, Y-Axis [404671]
  Nakamura Tome WT150IIMMY, NT-IPS,2",2011,Live Tool,Sub-Spindle,Y-Axis upper [404582]
  Nakamura Tome WT150MMY, Fanuc 18ITB, 2", 2005, Live Tool, Sub-Spindle, Y-Axis [395912]
  Nakamura Tome WT150MMY, Fanuc 18iTB, 2", 2003, Live Tool, Sub-Spindle, Y-Axis [404581]
  Nakamura Tome WY100II, NT Smart X, 6"Chk, 1 5/8", 2018, 2 Turrets, Y-Axis, Sub [402742]
  Nakamura Tome WY100MMY, Fanuc, 6"Chk, 1 5/8", 2013, 2 Turrets, Y-Axis, Sub, B/F [402739]
  Nakamura Tome WY250MMYY, Fanuc 31iT, 10"Ck, 2 1/2", 2011, 2-turret,2-Y axis, sub [403938]
  Nakamura-Tome Slant 3B, Fanuc 11T, 10"Chk, 3", Chip Conveyor, Tail Stock [404630]
  Nakamura-Tome WTS-150, Fanuc 16iTB, 6"Chk, 1 1/2", 2003, Iemca Boss 545, HPC [402834]
  OKUMA 2SP-150H, OSP-P200L, 8"Chk, 1 1/2", 2012, Twin Spindle/Turret, Gantry Load [403034]
  Okuma Cadet L1420, OSP 700L, 1998, SMW Spacesaver [402800]
  Okuma Genos L400E, OSP-P300L-R, 10"Chk, 3", 2014, Tail Stock, Conveyor, Parts Ca [404075]
  Okuma LB15, OSP 5020L, 8"Chk, 2", Tailstock, Chip Conveyor, Parts Catcher [402645]
  Okuma LB-15II-MW, OSP 5020L, 5"X, 20"Z, Chip Conveyor, Sub-spindle,live tool [404977]
  OKUMA LB45II C2000, OSP-P300L, 24"Chk, 10 1/4", 2015, Tail Stock, 12 Station [398354]
  OKUMA LT-200M, OSP E100L, 6"Chk, 2", 2007, Twin Turret, Twin Spindle,Live [403079]
  OKUMA LT200MY, OSP P100L, 2", 2005, Sub, C-Axis, Live Tool, Y-Axis [403037]
  OKUMA LU 15/2ST/350, OSP 7000L, 8"Chk, 2", 1995, CHIP CONVEYOR [395412]
  OKUMA LU-S1600, OSP-P300L, 2 5/8", 2014, installed 2017 - LOW HOURS [401043]
  Okuma LU-15II/MW, OSP 7000L, 6"Chk, 1997, 4 Live, Conveyor, Bar Feed [402799]
  Okuma MacTurn 350W, OSP-E100L, 10"Chk, 2", 2003, 12K RPM, B & Y-Axis, HPC [403482]
  Okuma MacTurn 30-W, OSP7000L, 8"Chk, 2", 2000,Rigid Tap,U-axis,Chiller,Conveyor [400429]
  Okuma Multus B400-BB, OSP P200LA, 15"Chk, 3 1/4", 2011, Tailstock, Full C-Axis [404271]
  Samsung SL-15, Fanuc 0i-Mate, 6"Chk, 1 3/4", 2016, Tailstock, Tool Setter [402100]
  Southwestern Industries TRAK TRL 1630SX, PROTOTRAK SLX, 2", 2005, Traking, [403821]
  Summit Smartcut, Fagor 8055TC, 20"x60"cc, 3"hole, 2008, Hand Cntrl, with turret [400516]
  TAKAMAZ XD-10I, FANUC 21I-T, 6"Chk, 2006, Gantry Loader, ED80 CNC Loading System [403070]
  Takisawa TT-200, Fanuc 21i, 8"Chk, 2", 2003, Gantry Load/Unload, 16 Station [402227]
  Takisawa TT-2100G, Fanuc Oi-TF, 8"Chk, 2018, Conveyor, (2) Chucks, Tooling [402446]
  Tecno Wasino G07, 1.5" bar, Gang-tool, Fanuc 21iTB, 2005, Gantry Loader [400375]
  Tecno Wasino G07, 1.5" bar, Gang-tool, Fanuc 21iTB, 2005, Gantry Loader [400376]
  Tecno Wasino JD-1, FANUC 21iT, 1.5" cap. 3"Chk, 2002, sub spindle, 8 pos turret [398159]
  Tecno Wasino JD-1, FANUC 21iTB, 3"Chk, 1.5" cap, 2005, 8-pos turret, sub spindle [398156]
  1 1/8", TRAUB TNM-28, TRAUB TX 8H, 1999, C-Axis, Stamag Barloader [399515]
  TRAUB TNX 65/42, 2 1/2", 2012, Dual Lower Turret, B-Milling upper Turret,Barfeed [404153]
  Tsugami MB-38SY, Fanuc LH1, 1-1/2", 2004, 2x8 Pos Trrt, 6-Axis, Sub, Iemca 547 [345879]
  Tsugami MB-38SY, Fanuc LH1, 1-1/2", 2005, 2x8 Pos Trrt, 6-Axis, Sub, short Iemca [398331]
  YAMA SEIKI GA2800LM, FANUC 18iTB, 10"Chk, 3", 2006, Live tool, Prog Tail [402401]
  Yama Seiki GS-2800YS, Fanuc 18iTB, 3", 2010, Y-Axis, Live Tool, Sub Spindle [402230]

0L2155   LATHES, COMBINATION, N/C & CNC, 3-AXIS OR MORE
  NAKAMURA-TOME WT-300MMY Big Bore, Fanuc, 2005, Y-axis, Dual Turret, 4" Bar Cap [398251]
  Okuma Multus B750-W/4000 OSP-P200L,10.75", 2010, 5-axis, 24" Sub, [401135]

0L3000   LATHES, ENGINE_See also other Lathe Categories
  9" x 30" cc, HARDINGE, DSM-59, 6 Position Manual Turret, Reburbished [398152]
  15" x 50" cc, Clausing Colchester, Tooling [404637]
  18" x 40" cc, GRIZZLY, 2018, DRO, STEADY REST, GAP BED [403781]
  18" x 60" cc, Mighty Turn 1860GL [401366]
  18" x 64" cc, Andrychow, DRO, Gap Bed,In/mm, tooling, Steady Rest [399959]
  18" x 80" cc, JET, MODEL GH-1880ZX, 2015, DRO, 3 & 4 Jaw Chucks, Tailstock [396034]
  24" x 105" cc, LEBLOND,Aloris Tool Holder,1600 RPM,Taper Attachment [345931]
  26"/38"x 120" cc, SUMMIT Mdl 25, 4" bore, Chuck, tailstock, SR, taper attch [396327]
  28" x 132" cc, TOS,16" Roller Steady Rest, 15" 4 Jaw Chuck, Rapid Traverse [345930]
  45" x 160" cc, Cincinnati Anaconda-H, 2019, CLutch, Tailstock, Tool Post [402845]
  53" x 160" cc, Poreba TR135B2/4M, 1988, Tailstock, 39" Chuck, QC Toolpost [401049]

0L3040   LATHES, ENGINE (SHAFT), N/C & CNC
  15" x 40" Clausing CKE6140Z, Fanuc 0iTC, 8"Chk, 2007, Collet Chuck, Tailstock [403814]
  18" x 40", Ganesh GT-1840CNC, 2016, Fagor, 10" Chuck, tailstock; like new [403802]
  Summit Smartcut, Fagor 8055TC, 20"x60"cc, 3"hole, 2008, Hand Cntrl, with turret [400706]
  30" x 15", Willis 30120-6, Chip Conveyor, 8 Station Turret, Fanuc 0i-TC [400388]
  30" x 120"cc, Willis 30120-6, 6" hole, Fanuc 0iT, Post & 8 Station Turret [400356]
  32"x80cc", Willis 3280-10, Fanuc 0i-TD, 10" bore, Conveyor, 25" Chuck [400354]
  40" x 31", Kingston HR5000, 2000, Heidenhain DRO, 24" Chk, Steady Rest, Tailstoc [402835]

0L4106   LATHES, OIL FIELD & HOLLOW SPINDLE
  30" x 160", Ganesh GT-3080, 2011, MT#6, [401497]
  34" x 17", Ganesh GT-3880, 2013, Fanuc Oi-TD, Tailstock, Steady Rest [400966]
  44" x 120", GANESH GT-44120, 2012, 6" Bore, 30HP, 15.74" Steadyrest, Tailstock [342937]

0L4304   LATHES, PRECISION, JEWELERS, TOOLROOM, Etc.
  Ganesh GT-1340, 2019,"New", 13" x 40". Inch/Metric, Chuck Guard, Footbrake [403952]
  Ganesh GT-1340, 2019, "New", 13" x 40". Inch/Metric, Chuck Guard, Footbrake [403953]
  Hardinge HLV-H-EM, 1985, DRO, QC Toolpost, Drill Chuck, Follow Rest [404706]
  5/16" Levin Micro Turn II, Fagor Control, C-Axis, Live Cross, Barfeed [401376]

0L6230   LATHES, TURRET, N/C & CNC
  Monarch 150 Turret Lathe, 1997 [401383]

0L6454   LATHES, VERTICAL TURRET
  Bullard Cutmaster,2018 Rebuild, 160 RPM, 54" Table, 62" Swing, Extra High Column [402961]
  Doosan V8300M, 2019, Fanuc i, 12 Station Turret,15", Chip Conveyor,2-SP GB, [403990]
  OKUMA, No. 2SP-V80, 2012, (2)1,250 RPM, (2)4.3" Bore, (2)12 Station Turret [395358]
  Okuma & Howa V60R-M, 2005, Live Tools [399761]

0L6770   LEAK DETECTION EQUIPMENT
  ULTRATEST, LEYBOLD-HERAEUS, No. M2, M2DS, M2BY, Helium Leak Detector w/ Vac Pump [392205]

0M0105   MACHINING CENTER ACCESSORIES, PARTS, TOOLING
  (20 Total) BT30, ASSORTED,(1)1/4, (5)3/8, (8)1/2, (2)3/4, (4) ER16 [343262]
  Spindle Assembly & Motor, Aug 2017, Cat 40 [397465]
SPINDLE, HAAS MINI MILL, [396833]
  SPINDLE ASSEMBLY & MOTOR, HAAS MINI MILL, [393476]
  SPINDLE ASSEMBLY & MOTOR, HAAS MINI MILL, [393478]
  SPINDLE ASSEMBLY & MOTOR, HAAS MINI MILL, [396832]
SPINDLE ASSEMBLY & MOTOR, HAAS MINI MILL, [396930]
  SPINDLE MOTOR, HAAS MINI MILL, 6,000 PRM, 5HP, 200V, [393323]
  SPINDLE MOTOR, HAAS MINI MILL, 6,000 PRM, 5HP, 200V, [393479]
  SPINDLE MOTOR, HAAS MINI MILL, 6,000 PRM, 5HP, 200V, [396834]
TOOL CHANGER, HAAS MINI MILL, [396909]
TOOL CHANGER, HAAS MINI MILL, [396910]

0M0115   MACHINING CENTERS, CNC, 5-AXIS OR MORE
  53"X 45"Y 35"Z Mikron UCP 1350, 2002, TNC 426, Probing, Conveyor, 92 ATC [401261]

0M0130   MACHINING CENTERS,HORIZ,N/C & CNC(Incl.Pallet Chan
  11.81"X, 19.69"Y, 17.72"Z, MATSUURA MAM-500HF PC11, 1995, Yasnac I80, 210 ATC [398210]
  17.7"X, 15.7"Y, 15.7"Z, MATSUURA ES450HII, 2000, Fanuc 18i, HP Thru Spindle, TP [402474]
  20"X, 14"Y, 20"Z, HAAS MDC-500, 2006, Coolant thru, rotary pallets [401352]
  22"X, 24"Y, 22"Z, Okuma MA-40HA, 2002, OSP-E100M, 1 Degree, HPC, Probe, Conveyor [404508]
22"X, 24"Y, 25"Z, MAZAK NEXUS PFH 4800 [401606]
  22"X, 24"Y, 24"Z, Okuma MA400HA, 2004, 154 ATC, 12000 RPM, Full 4TH, TSC [401409]
  22"X, 25.2"Y, 25.2"Z, MAKINO A51NX, 2015, CTS, 60 ATC, 14k RPM, CAT#40 [404025]
  22.05"X, 22.05"Y, 23.6"Z, MAKINO A55E, 2002, Makino Pro3 Cntrl, Full 4th [402792]
  23"X, 22"Y, 22"Z, Doosan HC400M, 2013, Auto Pallet Changer, Probe, Mist Collectr [404735]
  23"X, 23"Y, 23"Z, Toyoda FH450S, 2008, Fanuc 31i, Through Spindle Coolant [404543]
  24"X, 20"Y, 20"Z, Kitamura Mycenter H-400, 1997, Fanuc, 10K rpm, Full 4th,100atc [401811]
  24"X, 20"Y, 20"Z, Kitamura Mycenter H-400, 1998, Mits, 10K rpm, Full 4th,100atc [404557]
  24.8"X, 24.4"Y, 27.9"Z, OKK HP500S, 2006, Fanuc 180i, Conveyor, 12,000 RPM [400386]
  24.8"X, 24.4"Y, 27.9"Z, OKK HP500S, 2006, Fanuc 180i, Conveyor, 12,000 RPM [400387]
  28.7"X, 28.7"Y, 33.5"Z, MORI SEIKI NHX5000, 2016, 12K RPM, 60 ATC, full 4th [401562]
  28.7"X, 28.7"Y, 33.5"Z, MORI SEIKI NH5000, 2003, 1 Degree, 120 ATC, 6 Pallet [398260]
  29.9"X, 29.9"Y, 29.9"Z, OKUMA MB5000H, 2018, 146 Matrix ATC, HP Coolant, Mist [403152]
  39.3"X, 31.5"Y, 29.5"Z, OKUMA MC-600H, 1 degree, Cat 50, 40 Position ATC, 6k RPM [393976]
  41"X, 31"Y, 31"Z, Mazak FH-680, 1997, 15K RPM, 6 Pallet Changer, 80 ATC [404680]
  41.3"X, 35.4"Y, 38.6"Z, MORI SEIKI NH-6300 DCG II, 2011, HP TSC, Probe, 120 ATC [402643]
  41"X, 33"Y, 35"Z, Kitamura HX-630i, 2007, Fanuc 16iMB, 2 Spare Pallets,Tombstone [403153]
  41.34"X, 35.43"Y, 38.58"Z, MAZAK HCN 6800-II, 2011, 16 Pallet Stockers [402504]
  49"X, 39"Y, 39"Z, Doosan HM-8000, 2012, Fanuc 31iA, Full 4th, HPC, Low Hours [404644]
  53"X, 45"Y, 45"Z, Toyoda FA-800, 2006, Fanuc 16iM, Conveyor, Pallet Changer, HPC [401340]
  55"X, 43"Y, 39"Z, OKK HM-1000S, 2008, Fanuc 310iS, Chip Conveyor, Full 4th [404490]
  64"X, 50"Y, 40"Z, Haas EC-1600ZT, 2017, 4th Rotary, 5th Axis Drive, Rigid Tap [403329]
  80"X, 51"Y, 53"Z, Kitamura HX1000i, 2011, Full 4th/5th, Fanuc 16i-MB [404750]
  86"X, 47"Y, 72"Z, Toyoda FH1250SX, 2008, Fanuc 310i, Chip Conveyor [404417]

0M0185   MACHINING CENTERS, VERT., N/C & CNC
  12.6"X, 17.7"Y, 14.9"Z, Ganesh 5X-8 w/ 4+1, 12,000 RPM, M830 Control [403935]
  12.92"X, 7.87"Y, 9.84"Z, MATSUURA LX-0 5AX, 2003, 5 Axis, 40k RPM, Robot Load/UN [403588]
  14"X, 10"Y, 10"Z, Tsugami VA1-II, 2014, Fanuc 0i-MD, 4th Ready, Double Arm ATC [399603]
  15"X, 16"Y, 18"Z, Hardinge GX480, 2007, Fanuc Oi-MC, Mist Collector, 14,000 RPM [401041]
  16"X, 12"Y, 10"Z, Haas Mini Mill, 2000, Rigid Tapping, 3.5" Floppy, 6000 RPM [403786]
  Haas Mini Mill, 16"X, 12"Y, 10"Z, 2000, Cat 40, 10 Tool ATC [403853]
  Haas Mini Mill, 16"X, 12"Y, 10"Z, 2001, Cat 40, 10 Tool ATC, 4th Axis Rotary [403854]
  Haas Super Mini Mill, 16"X, 12"Y, 10"Z, 2005, Cat 40, 10 Tool ATC [402801]
  Haas Super Mini Mill, 16"X, 12"Y, 10"Z, 2005, Cat 40, 10 Tool ATC, 4th ready [403804]
  17.71"X, 10.62"Y, 12.2"Z, Chiron FZ08KS Magnum w/ Swivel Head, 2009, 1.125" Bore [402949]
  19"X 16"Y 20"Z Mazak Nexus VCC, 2013, Rotary Table, Chip Conveyor [401266]
  19.7"X, 17.7"Y, 13.8"Z, MIKRON HSM 500, 2010, 42K RPM, HSK E40, Tool Measuring [392381]
  20"X, 14"Y, 16"Z, Leadwell MCV-OP, 1991, Mits Control, Clean [400225]
  20"X, 14.1"Y, 18.1"Z, Matsuura MC-510VF, Table 14.96" X 29.9", 8,000 RPM, 30 ATC [404628]
  20"X, 16"Y, 14"Z, HAAS SUPER MINIMILL II, 2009, 10k RPM, Tool Setter [404168]
  20"X, 16"Y, 14"Z, HAAS SUPER MINIMILL II, 2009, 10k RPM, Tool Setter, 5C Indexer [404169]
  20"X, 16"Y, 20"Z, DYNAMYTE DM4500, 10k Spindle, Meldas300 Control, [345809]
  20"X, 16"Y, 20"Z, Haas VF-1, 2018, 15K RPM, Cabinet Cooler, P-Cool [404511]
  20"X, 16"Y, 20"Z, HAAS VF1, 1990, [398242]
  20"X, 20"Y, 19"Z, Advanced Grinding Sys (AGS) 42-3A, Sintered Ceramic Grind/Mill [401818]
  20"X, 25"Y, 9"Z, Datron M75, 2012, Probe, Coolant System, High Pressure Mist [404733]
  21"X, 11"Y, 16"Z, Chiron FZ12W, 1996, Fanuc 3-axis [401378]
  21"X, 11"Y, 16"Z, Chiron FZ12W, 1997, Fanuc 3-axis [401379]
  21"X, 11"Y, 16"Z, Chiron FZ12W, 1998, Fanuc 3-axis [401380]
  22"X, 16"Y, 18"Z, Mori Seiki MV40/40, Fanuc 10M, CT40, 8000 RPM, 4th axis [401205]
  22"X, 16.1"Y, 18.1"Z, Mori Seiki MV40 [391945]
  23"X, 16"Y, 18"Z, Matsuura MC-600VF, 1993, Yasnak i80, Rotary Table [404624]
  24"X, 15"Y, 17"Z, Ganesh VFM 2416, 2015, 12K RPM, Chip Conveyor, Like New [404401]
  24.01"X, 15.75"Y, 17.72"Z, Ganesh Genmill 2416, 2019, "New" 12,000 RPM, Mits 830 [403955]
  25"X, 13"Y, 17"Z, Atrump V3EC, 2004, Tool Setter, Probe, Centroid [404264]
  25"X, 20"Y, 18"Z, DMG MORI DURA VERTICAL 635 ECO, 2012 [399969]
  25"X, 20"Y, 18"Z, DMG MORI DURA VERTICAL 635 ECO, 2011 [399970]
  27"X, 17"Y, 17"Z, MAKINO FNC 74, FANUC 6M, 7000 RPM, 20 ATC [398237]
  27"X, 17"Y, 17"Z, MAKINO FNC 74, FANUC OM, 7000 RPM, 20 ATC [398238]
  27"X, 19"Y, 22"Z, QUASER MV154 APC-E, 2012, 12K rpm, pallet switcher Fanuc 0iMD [403577]
  27.9"X, 21.6"Y, 19.6"Z, MIKRON UPC-710, 2000, Tool & Parts Probe, Part Probe [395851]
  27.95"X, 17.71"Y, 18.11"Z, Ganesh Genmill 2818, "New", 2018 [403963]
  30"X, 12"Y, 16"Z, HAAS TM-1, 2004, 10 ATC [403787]
  30"X, 12"Y, 16"Z, Haas TM-1, 2004, Rigid Tapping, 10 ATC, Chip Guards [404214]
  30"X, 16"Y, 18"Z, Matsuura MC-760V2, 1984, Yasnac MX1, 30 ATC, 6k RPM [402737]
  30"X, 16"Y, 18"Z, MATSUURA MC-760VX, 1987, BT-40 [404639]
  30"X, 16"Y, 20"Z, Doosan MV3016LD, 2007, TSC, Chip Conveyor [400066]
  30"X, 16"Y, 20"Z, FADAL, No. VMC 15XT, 1997 [398368]
  30"X, 16"Y, 20"Z, Haas VF-2SS, 2013, Rigid Tapping, High Speed, 4th Axis [403363]
  30"X, 16"Y, 20"Z, Haas VF-2SS, 2009, Rotational & Scaling, Rigid Tap, 4th Enable [404946]
  30"X, 16"Y, 20"Z, Haas VF-2D, 2002, Auger, Programmable Coolant, Rigid Tap [404944]
  30"X, 17.1"Y, 20.1"Z, DOOSAN DNM-400HS, 2011, 15k RPM, TSC, [342984]
  30"X, 18"Y, 18"Z, Kitamura Mycenter-3XG, 2011, 15K RPM, Chip Conveyor [403372]
  30"X, 20"Y, 20"Z, Haas UMC-750, 2014, Conveyor, Rotation & Scaling, P-Cool [404219]
  30"X, 20"Y, 20"Z, Haas UMC-750, 2014, Rotation & Scaling, Probing, Expanded Mem [404221]
  30"X, 20"Y, 20"Z, Haas UMC-750SS, 2015, 15K RPM, Probing, Rigid Tap, Trunnion [404220]
  30"X, 20"Y, 20"Z, Haas UMC-750SS, 2016, 15K RPM, Trunnion, Probing, Conveyor [404222]
  30"X, 20"Y, 20"Z, Haas VM-2, 2012, P-Cool, Rigid Tap, 4th Pre-Wire [404393]
  30"X, 20"Y, 20"Z, Hurco VMX 30U, 2011, Chiller, Conveyor, Probing, Tool Measure [401269]
  30.71"X, 22.05"Y, 22.05"Z, DECKEL-MAHO DMC 60T, 2007, HP Coolant [402371]
  31.5"X, 20"Y, 20"Z, TOYODA FV850S, 2011, 15K rpm, 32atc, 4th axis, HPC [404110]
  31"X, 26"Y, 19"Z, Matsuura VMAX-800, 2002, Rotary Table [404626]
  31.5"X, 20"Y, 20"Z, HARDINGE 800 II, 2001 [403973]
  34"X, 20"Y, 24"Z, Atrump M320, 2007, Probe, Tool Setter, Chiller, Chip Auger [404265]
  34.64"X, 23.62"Y, 25.59"Z, Ganesh 5X-8, 12K RPM, Mits M830 Control, 2018,"New" [403960]
  36"X, 33"Y, 25"Z, DMG Mori Seiki DMU 85 Monoblock, 2016, Rotary Table, 60 ATC [401922]
  38"X, 24"Y, 24"Z, DMG DMU 80 Monoblock, 2011, ITNC 530, C-Axis, Rotary Table [401882]
  38"X, 24"Y, 24"Z, DMG DMU 80 Monoblock, 2013, ITNC 530, C-Axis, Rotary Table [401894]
  38"X, 24"Y, 24"Z, DMG DMU 80 Monoblock, 2013, ITNC 530, C-Axis, Rotary Table [401895]
  40"X, 20"Y, 20"Z, Fadal 4020, 2010, Chip Conveyor, Fadal TR65 Table [402115]
  40"X, 20"Y, 20"Z, Fadal 4020, 1994, Spindle Cooler, 10,000 RPM, CT40 [402508]
  40"X, 20"Y, 20"Z, Fadal 4020HT, 88HS CNC Control, 1997, Rigid Tapping, [402111]
  40"X, 20"Y, 20"Z, Fadal 4020HT, 2005, Fanuc 18i-MB5, 10K RPM, High Pressure Wash [402959]
  40"X, 20"Y, 20"Z, FADAL VMC-4020, 1994, CNC 88HS, 21ATC, Indexer and control box [397198]
  40"X, 20"Y, 20"Z, FADAL VMC-4020, 1995, CNC 88HS, 21ATC [398365]
  40"X, 20"Y, 20"Z, Fadal VMC-4020, 1990, CNC 88HS, 21 ATC [404986]
  40"X, 20"Y, 20"Z, FADAL VMC4020HT, 1999, Fadal Pallet Changer, Rigid Tap [401015]
  40"X, 20"Y, 22"Z, Daewoo MYNX500, 2001, 8,000 rpm, Box way, Fanuc 21M, 4th axis [326459]
  40"X, 20"Y, 25"Z, HAAS VF-3, 1997,4th Pre-wired,P-cool, 4th Axis Ready [394051]
  40"X, 20"Y, 25"Z, Haas, VF-3, 1995 [403288]
  40"X, 20"Y, 25"Z, Haas VF-3D, 2003, Chip Auger, P-Cool, 4th Ready [403583]
  40"X, 20"Y, 25"Z, Haas VF-3, 2004, 10K RPM, 4th/5th Prewire, P-Cool, Rigid Tap [404177]
  40"X, 20"Y, 25"Z, Haas VF-3SS, 2007, 12,000 RPM, Wireless Probe, Rigid Tapping [404207]
  40"X, 20"Y, 25"Z, Haas VF-3SS, 2007, 12,000 RPM, 4th/5th TR210, P-Cool [404941]
  40"X, 20"Y, 28"Z, FADAL 906-1, 1995,W/ 4th axis [400634]
  40"X, 21"Y, 20"Z, DOOSAN DNM500, 2010, 12000 RPM, 4th AXIS TABLE [404918]
  40"X, 21"Y, 20"Z, Doosan DNM-500II, 2013, Fanuc OiMD, Probe, Mist Collector [404736]
  40"X, 21"Y, 21"Z, Bridgeport Hardinge GX1000, 2011, Rigid Tapping [404643]
  40"X, 26"Y, 24"Z, Haas VM3, 2007, Probe, P-Cool, Rigid Tapping, Chip Auger [400973]
  40"X, 26"Y, 25"Z, Haas VM-3, 2006, P-Cool, Chip Auger, 12,000 RPM [403665]
  40.1"X, 21.6"Y, 24.9"Z, YAMA SEIKI AF-1000, 2012, 15K RPM, Chip Conveyor [398411]
  40.55"X, 23.62"Y, 25.59"Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, 2019"New" [403957]
  40.55"X, 23.62"Y, 25.59"Z, Ganesh Genmill 4024, Mits M830, 12,000 RPM, 2019"New" [403958]
  41"X, 20"Y, 20"Z, Samsung MCV50, 2015, Fanuc Oi-MD, Rigid Tapping, 12K RPM [404690]
  42"X, 24"Y, 20.5"Z, HURCO VMX42UI, 2014, 5 AXIS TRUNNION, 12,000 RPM [398713]
  42"X, 24"Y, 24"Z, Hurco VMX42i, 2013, Rigid Tap, Chiller, Conveyor [401069]
  42"X, 24"Y, 24"Z, HURCO VMX42SWI, 2015, 5 AXIS Tilting Head 12,000 RPM [401264]
  43"X, 25"Y, 23"Z, Toyoda Stealth 1165, 2011, CAT 40, 8,000 RPM [403643]
  43"X, 25"Y, 23"Z, Toyoda Stealth AA1165, 11/2016, 51" x 25", 12,000 RPM [403846]
  44"X, 22"Y, 22"Z, Kitamura Mycenter 4XD, 2016, Mitsubishi Control, 10K RPM [404512]
  50"X, 20"Y, 25"Z, Haas, VF-4,'09, Cat 40, Rigid Tap, 4Th Axis ready [398297]
  50"X, 20"Y, 25"Z, Haas VF-4, 2016, P-Cool, Rigid Tapping, Wireless Probing [404195]
  50"X, 20"Y, 25"Z, Haas VF-4D, 2006, P-Cool, Chip Auger, 24 Tool Changer [403582]
  50"X, 20"Y, 25"Z, Haas VF-4D, 2005 [404945]
  50"X, 20"Y, 25"Z, HAAS VF4, 2001, Programmable Coolant, Rigid Tap, Auger [399278]
  50"X, 20"Y, 25"Z, HAAS VF4SS, 12,000 RPM, 4th Axis Table, Probing, P-Cool [404942]
  50"X, 20"Y, 25"Z, HAAS VF4SS, 12,000 RPM, 4th Axis Table, Probing, P-Cool [404943]
  50"X, 20"Y, 25"Z, HAAS VF4SS, Midaco APC, 12K Spindle, 4th Axis Ready [398302]
  50"X, 20"Y, 29"Z, Haas VF-4, 2012, Chip Auger, P-Cool, 24 Tool [403580]
  50"X, 20"Y, 29"Z, Haas VF-4, 2013, Chip Auger, P-Cool, 24 Tool [403581]
  50"X, 26"Y, 24"Z, Doosan Mynx 6500, 2014, Fanuc Oi-MD, Pulse Generator, Conveyor [404693]
  50"X, 26"Y, 25"Z, Haas VF-5/40, 2005, 10,000 RPM, P-Cool, Rigid Tap, 24 ATC [401881]
  50"X, 26"Y, 25"Z, HAAS VF-5, 2000, 4th Axis Ready, 16 Meg, Macros, Ridgid Tap [399366]
  50"X, 26"Y, 25"Z, Haas VF-5, 2013, Probing, Rigid Tap, Rotation & Scaling [404920]
  50"X, 26"Y, 25"Z, Haas VF5/40, 2005, 10,000 RPM, Rigid Tap, P-Cool, Auger [402194]
  50"X, 26"Y, 25"Z, Haas VF5/40, 2005, 10K Spindle, 4th Prewire, Rigid Tap, P-Cool [402492]
  50"X, 26"Y, 25"Z, Haas VF-5SS, 2007, Probing, Auger, Through Spindle Coolant [404208]
  "NEW" GANESH VFM-5127, 51"X, 27.6"Y, 25.6"Z, 30 Station, 12,000 RPM [344151]
  60"X, 27"Y, 24"Z, Matsuura VX-1500, 8/2018, Fanuc 31iB, Renishaw Probe, 4th Axis [404435]
  60"X, 30"Y, 28"Z, Fadal 6030 HT, 2006, Rigid Tapping, 21 ATC, 4th Acis Ready [400861]
  63"X, 33.4"Y, 33.4"Z, Ganesh Genmill 6333, 2018,"New" Mits M830 Control, 12K RPM [403959]
  64"X, 32"Y, 30"Z, Haas VF-6/50, 2006, 4th Axis Prewire, 10K RPM, P-Cool [403053]
  64"X, 32"Y, 30"Z, Haas VF6B/40, 2004, Probing Package, 10,000 RPM, 4th Wired [401302]
  65"X, 25"Y, OOYA RE-2M, 1981, Fanuc 6M, 30ATC, Fully operational, [401273]
  "NEW" GANESH VFM-7039, 2014, 70"X, 35"Y, 39"Z, 8,000 RPM [343681]
  Kasuga QUANTUM Q2000V42, Fanuc 18i-M, 80"x34", 12K RPM, Cat50, NEW SPINDLE [400438]
  84"X, 40"Y, 30"Z, Haas VF-9, 2003, Rigid Tap, 10K RPM, Chip Auger [404905]
  102"X, 43"Y, 35"Z, DMG MORI DMF 260II LINEAR, 2014, 126" x 43.3" Table [401479]
  118"X, 33"Y, 31"Z, Doosan VCF 850L, 2015, Fanuc i, Conveyor, 60 ATC, 12,000 RPM [403052]
  120"X, 32"Y, 30"Z, Haas VF-10, 2010, Renishaw Probe, Overhead Crane, 10K RPM [403464]
  120"X, 32"Y, 30"Z, HAAS VF-10, 2007, Probe, P-Cool, Auger, Rigid Tap [399318]
HAAS SPINDLE MOTOR, New, Includes Encoder [399353]
HAAS SPINDLE MOTOR, New, Includes Encoder [399354]

0M0188   MACHINING CENTERS, VERT., N/C & CNC, BRIDGE TYPE
  315"X, 92"Y, 54"Z, Giddings & Lewis Numerimil, 1969, Right Angle Head [338784]

0M0210   MACHINING SYSTEMS, FLEXIBLE, N/C & CNC
  MORI SEIKI, (2) SH-503 w/ 18 pallet pool, Fanuc, , 2001, 120 ATC, 40 taper, CTS [398951]

0M0758   MARKING MACHINES, LASER
  FOBA M2000P Workstn, FIBER Laser, 30W, 2017, 1055-1075nm, rotary axis, like new [403746]
  IPG PHOTONICS YLP-1/100/20/20-HC, Fiber, 2009, 100 Mjules/20millisec, 20W [392630]
  ROFIN STARMARK SLM10E-0008 YAG, Mark/Etch, Rotary table, Pulse fiber optic [393718]

0M1670   MILLERS, HORIZ. & VERT. (Comb.)
  No. 307-14, CINCINNATI, motorized overarm w/ vertical head, 14x64" table [394931]

0M1870   MILLERS, KNEE, N/C & CNC
ACRA WS-18VH, TRAX, [336275]
  Alliant, Proto Trak MX2, 10x44" table, 4250 RPM, 2hp V-S [400673]
  FRYER MB14 BEDMILL, ANILAM 3300MK (Upgraded 2000), 1997, Table 40x18" [400825]
  FRYER MB-15Q, 1997, 4th axis, 50 x 25 x 24" travel, 10hp, [338356]
  (NEW) Ganesh GMV-1F & 2F, Fagor 8055MC, 2018, 9" x 42" or 9" x 50" Table [400590]
  Lagun Mdl 310 CNC Knee Mill, 3-axis, 9x49", Mach Motion Retro 2019, warranty [401780]
  50" x 12" Milltronics Partner VK4 Series F, Centurion Control, Power Feed Knee [401541]
  SHIZUOKA AN-S, 3-axis FAGOR, HVY Duty 11"x51" TABLE, 4HP, 3800 RPM, 40 TAPER, CA [399756]
  TREE JOURNEYMAN 425, New Mach Motion Retrofit, Hvy duty Knee mill, 15"x30" trvl [403796]

0M1974   MILLERS, PLAIN HORIZONTAL
BROWN&SHARPE,Horizontal Miller [398694]

0M2824   MILLERS, VERTICAL
  4VS JET, 2018, POWER FEED, DRO, 9" X 49" [403778]
  Bridgeport Series 1, Accurite III, One Shot Lube [338336]
  Bridgeport Series II, Anilam, Mist Coolant [338006]
  2016, "New", Ganesh GMV-1F, 9" x 42" [403965]
  (NEW) "New" Ganesh GMV-4, 12" x 54" Table, 4,000 RPM, 40 Taper Spindle [339394]
  Lagun FU4-LA, Auto Lube, Anilam 2 Axis DRO [336193]
  MB14 FRYER, Anilam 3-axis; 2001, 40x18x21 travels, CT40, No tool chgr [400592]
  Bridgeport Series 1, Power Feeds, DRO, Variable Speed, Power Drawbar [404634]
  Bridgeport Series 1, Power Feeds, DRO, Variable Speed, Power Drawbar [404635]
  Bridgeport, Power Feeds, DRO, Variable Speed, Power Drawbar [404636]
  KEARNY & TRECKER,HD knee mill [396659]

0M2833   MILLERS, VERTICAL/UNIVERSAL, N/C & CNC
  (NEW) "New" Ganesh GMV-3 CNC, 10" x 54" Table, Fagor 8055 CNC, 4200 RPM, R8 [398782]
  Southwestern Industries TRAK DPM2, PROTO TRAK SMX, 2-xis + Z-DRO, Power drawbar [400165]

0P0103   PACKAGING MACHINES
420-7, HANNAN, fully auto vacuum forming skin packaging, [394451]

0P0275   PANEL BENDERS, N/C & CNC
FASTI, No. 225-32/4, [400491]

0P1249   PINCH ROLLS
  BUILT-RITE, No. MP2.187, 2008, [341940]
  MILTON, No. 416, 1/2"-5/16"-1/4" wire grooves, forward/reversing switch [392259]

0P2650   PLATES, ANGLE
  Angle Plate 30" x 20" x 18" [311506]

0P2840   PLATES, SURFACE AND INSPECTION
  36"L x 24"W x 6"Thk, Rock of Ages [396020]

0P2854   PLATFORM, SCISSOR LIFT, NARROW, ELECTRIC
  Absolute EZ UP IAWP-15, 21 Ft, 63"x29"x73"W, 2016, 616# Cap, 2 Extension decks [402854]

0P3553   PRESETTERS
  CITIZEN APJ101, Setting Jig for Back Machining for F20/F25 [338531]
  CITIZEN, ATP-101, F20/25 SETTING BLOCK W/TOOL SETTING JIG, MOUNTS TO TP-1000 [286797]
  CITIZEN, ATP-101, F20/25 SETTING BLOCK W/TOOL SETTING JIG, MOUNTS TO TP-1000 [317579]
  CITIZEN, ATP-101, F20/25 SETTING BLOCK W/TOOL SETTING JIG, MOUNTS TO TP-1000 [317581]
  CITIZEN, ATP-101, F20/25 SETTING BLOCK W/TOOL SETTING JIG, MOUNTS TO TP-1000 [317582]
  CITIZEN CTP-101, Jig Only [317588]
  CITIZEN, KTPZ-101, HALF INDEX SET PLATE FOR E25J/E25/E32/M(2)20/M(2)32 [205936]
  CITIZEN, KTPZ-101, HALF INDEX SET PLATE FOR E25J/E25/E32/M(2)20/M(2)32 [318649]
  Citizen Presetter Slider Clamp for TP-1000 [317583]
  CITIZEN-CINCOM, TP-1000, Universal Tool Presetter, INCH, for all turret models [316689]
  CITIZEN-CINCOM, TP-1000, Presetter, INCH, for all turret model Citizens [338858]
  CITIZEN-CINCOM, TP-1000, Presetter, INCH, for all turret model Citizens [392368]
  CITIZEN-CINCOM, TP-1000, Presetter, INCH, for all turret model Citizens [316690]
  Citizen TP-1000 Jig Block for Citizen M20/32 [404446]
  Tornos 213-4C-003, 2000, Universal Tool Presetter with plates for Deco 20/26 [327427]
  Zoller/Hydromat Hyperion H300S3-00062, CRT, Keyboard, X,Y, Z setting, 2 fixtures [399161]

0P4132   PRESSES, DISHED & FLANGED END SPINNING
  JMT has teamed up with a world renowned Build; ask for your Quote Today [396270]

0P4948   PRESSES, HIGH SPEED PROD.
  20 Ton, MINSTER, No. PM2-20, 1974, 1.25" STR, 0-1000 SPM, [503038]

0P6185   PRESSES, O.B.I., BACK GEARED, SINGLE CRANK
  60 Ton, BLISS, C60, 1" STRK, 21"X32" BED, 60SPM, AC/AB, CUSHION [290866]
  60 Ton, BLISS, 4" Stroke, 100 SPM, 15 3/4 Shut Height [345813]
  60 Ton, BLISS, 1984, Air clutch and Brake, 5" Stock, 32" x 21" Bed, [394232]

0P6209   PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK
  60 Ton, BLISS, 1990, 60 Ton, 4" Stroke, 32" x 21" Bed, 14 1/4" SDAU [394233]

0P8890   PUMPS, WATER
  HAAS, COOLANT PUMP, [396915]
  HAAS, COOLANT PUMP, [396916]
  HAAS, COOLANT PUMP, [396917]
  HAAS, COOLANT PUMP, [396918]
  HAAS, COOLANT PUMP, [396919]
  HAAS, COOLANT PUMP,used [396920]
HAAS, COOLANT PUMP,New [399347]
HAAS, COOLANT PUMP,New [399348]
HAAS, COOLANT PUMP,New [399349]
HAAS, COOLANT PUMP,New [399350]

0P8915   PUNCH-SHEARS, IRONWORKERS
  (NEW) 2" x 2" x 1/2", JMT, 2017, JMT-IW 110 BTD, 120 Ton, Cap 1.75" x 0.5" / 1"x1" [395200]
  4"x4"x1/4" angle, 1-1/4" thru 1/2"MS, Peddinghaus Peddicat, 55 ton [394731]
  5"x5"x3/8" angle, 1-1/4" thru 7/8"MS, Peddinghaus Peddiworker, 100T Cap [394730]

0P9295   PUNCHES, TURRET, N/C & CNC
  22 Ton, Nisshinbo HTP 1000, PAL-510T, 1998 [402523]

0R3775   ROBOTS, INDUSTRIAL
  Fanuc Arcmate 120iB/10L, 2007, Fanuc R30iA, Teach Pendant [404262]
  Fanuc M410iB/160, 2003, RJ3iB Control, Teach Pendant, Robot Stand [404261]
  Fanuc M900iA/350, 2011, Fanuc RJ3iC, Device Net, Teach Pendant [404263]

0R4704   ROLLS, ANGLE BENDING
  2" x 2" x 1/4", BUFFALO [399320]
  3" x 3" x 3/8", DURMA PBH-80, New, 9.72" roll dia, Horz / Vert, [396275]
JMT, offers a full Line of New Profile Benders, 60T+, Ask for a quote [396261]

0R5603   ROLLS,PLATE BEND'G,INIT.& DBL.PINCH TYPE(Incl.Shee
  HELLER #S2050/6 SERGI, 6'-6" Max Bending Length, 6.7" Top Roll, 3/16" cap [394844]
  (NEW) 6' x 1/4", JMT, No. MRBS2006 [394743]
  (NEW) 6-7"' x 1/4", JMT #MRBS-2006, 2016, 3-Roll, Int. Pinch, Polished Rolls, like new [395077]
  (NEW) 6' x 1/4", JMT, No. MRBS2006, [396004]
  6' x 3/8", LOWN, No. G874, AIR DROP END, 8" ROLLS [394801]
  8' x 3/8", Imcar Carell, SIHRV, 2000, 3/8" x 8' [392019]
  3/4", BERTSCH, 75-10, 120" Width [392156]
  JMT offers a full line of Plate Rolls, ask for your quote today [396272]

0R5610   ROLLS, PLATE BENDING, PYRAMID TYPE (Incl. Sheet Me
  (NEW) 49" x .157" C Marshall, M1204L, 2016, 4 Roll, 3HP [393678]
  49" x .157" C Marshall, MH124L, 2012, 4 Roll, 3HP [393680]
  (NEW) 5' x 5/16", JMT, 2017, HRB4 1507 Hydraulic Four Roll Bending Machine NC Control [395713]
  (NEW) 8' x 5/16", 2017, HRB4 2508 Hydraulic Four Roll Bending Machine NC Control [398975]
  10' x 1/2", DAVI, 2011, MCB3028, 4 Rolls, 18HP, Davi CNC Control [395857]

0R5640   ROLLS, POWER TANK TURNING
JMT offers a full selection of Tank Turning Rolls, Ask for your quote Today [396269]

0S0653   SAWS, BAND, HORIZONTAL
  (NEW) 9" x 9", JMT WE310DS, 2018,10"round,manual pivoting,1.5HP [400960]
  (NEW) 10.2" x 10.2", COSEN C260NC, 5hp, 10x11.8" rectangle, [320095]
  10" x 12", MARVEL PA10/3, automatic, 10" rd, 16" shuttle feed, 5hp, 1-1/4 Blade [403602]
  12" x 12", HEM H90A-BF 1997, Feed Table, Auto Feed [401358]
  (NEW) 13" x 15 3/4", DoALL DC-330SA, PLC Control, Auger, Tool Kit [399708]
  14" x 16", HEM H105-LA, 1999, Chip Auger, Feed Table, Auto Feed [401271]
  14" x 20", HE&M DC 1420HA C, Auto Shut Off, Split Main Vise, Auger, Jogging [403492]
  (NEW) 16 1/2" x 16 1/2", COSEN C420NC, NEW [319841]
  16 1/2" x 16 1/2", Cosen C420NC, Chip Auger, 230V, 3HP, V-Drive [403646]
  16 1/2" x 16 1/2", Cosen C420NC, Chip Auger, 230V, 3HP, V-Drive [403647]
  18"x18" COSEN C460NC, 2007, Fully programmable, auto cycle qty/lengths [403470]
  (NEW) 22" x 20", DoALL DC-500SA, PLC Control, Auger, Guide Rollers, Tool Kit [399707]
  (NEW) 31 1/2" x 22", DoAll DC-560SA, PLC Control, Auger, Tool Kit [399705]
  40" x 44", Amada H-1000II, 2014, Auger, One Shot Lube, Laser, Motion Detector [402829]
  41" x 49", Kasto PBA 1060/1260, 1991, Roller Conveyor, Discharge Table [402837]

0S0730   SAWS, CIRCULAR COLD
  Metlsaw, No. S23-T6-20, 2014, Allen Bradley Panelview Plus 100 [402907]

0S0805   SAWS, COLD & CARBIDE
  10", EISELE VMS300PV, 2000 [391536]

0S0825   SAWS, COLD & CARBIDE (NON-FERROUS)
  14", DUTCH CPO 350 SA/HT, 2003, [334565]
  14", KALAMAZOO CT350ANC, 2003, Vacuum Chip Removal, Parts Counter, CNC [394248]
  14-1/2", DAKE EUROMATIC 370PP, 2011, Full Auto, 4"@90, 3-5/8"@45, Fe or Non-Fe [399099]

0S1053   SAWS, MITRE
JMT offer several models for Metal Cuting Band Saws, Ask for your quote Today [396266]

0S3975   SHEARS, HYDRAULIC, GUILLOTINE
  Accurshear 850010, 1994, 36" CNC Backgauge [337095]
JMT offers a line of New Shearing Machines, Hyd & Mech, Ask for pricing [396263]

0S4105   SHEARS, POWER SQUARING (Inches)
  1/4" x 10', CINCINNATI, No. 1810, POWER SQUARING SHEAR [398672]
JMT offers a line of New Shearing Machines, Hyd & Mech, Ask for pricing [396262]
  PACIFIC 500R14, 14' Length, 1/2" Mild Steel Cap, 3/4" Max. Rake, 18" Throat [395270]

0S4125   SHEARS, POWER SQUARING, N/C & CNC
  (NEW) KRRAS No. 3713, AUDEMI PGP-401 control, 2018, 145-5/8"length, 1/2"mild steel cap [398977]

0T0130   TABLES & INDEXERS, N/C & CNC
  TSUDAKOMA RCV-8300K, 2013, 31.5" CNC Rotary Table [403783]
HA5C, HAAS [404803]
  Haas TRT160 4th & 5th Axis Trunnion, 6.3" x 17.5", HAAS, [392535]

0T0140   TABLES, ROTARY
  6" x 10", Haas TR160, Brushless, Sigma 1 Motor [401055]
  Haas HRT 160-2, 6.3" Platter, Two Spindles [404394]
  HAAS, HRT-210SP 4th Axis rotary Table, 2013, under 200 hrs use [402806]
  Michigan, 66.92", 30,000 lbs on table, 45 Degree Stop [400607]
  HAAS, HA5C Programmable Rotary Table, cable and connector [399203]

0T0142   TABLES, ROTARY (STONE)
8" x 20", TROYKE, Model CS-9 [338891]

0T0245   TAILSTOCKS, LATHE
  HAAS HA5C-2 Tailstocks [403743]

0T2520   THREAD ROLLERS
  (2) Model #A-22 Reed Thread Roller [400887]

0T2810   TOOL HOLDERS, 40-TAPER
(58) CAT-40 tool holders [379599]
(20) CAT-40 Tool Holders [391080]
Box of 8 Misc Cat-40 tool holders [395264]

0T3980   TOOLING & ACCESSORIES, N/C & CNC
  5C Collet Chuck with A2-8 Mount [317485]
5C COLLETS [395263]
  UNIQUELINK BARCODE BUFFER MODEL 300 [262543]
  Exsys Eppinger, ER32A Drilling & Milling Head, Coolant Through, For Haas [404311]
  MicroCentric HSV3-3, 4" High Speed 3-Jaw Air Chuck, Air Tube [327072]
  MicroCentric HSV3-3, 4" High Speed 3-Jaw Air Chuck, Air Tube [327107]
  MicroCentric HSV3-3, 4" High Speed 3-Jaw Air Chuck, Air Tube [327108]
LIVE TOOLING, EPINGER [344986]
SCHAUBLIN, 61-25216, DRILL SLEEVE, 25mm x 7", ER25 [287400]
  (NEW) SPINDLE LINERS, JF BERNS (New) [314997]
  Sandvik BTS, 2 VDI turning, priced per each [334933]
(NEW) A&M is a distributor for WTO Precision Tool Holders [338628]
  WTO, Misc Tool Holders for Mori Seiki ZT and ZL Lathes, priced per EACH [343486]

0T4535   TRANSFER MACHINES, ROTARY, TRUNION (HOR.& VERT.)
HYDROMAT, No. V8, 8 Sta., [344154]

0T6298   TRUCKS, LIFT, GAS OR ELECTRIC
  2000# Presto Lift, Mdl WPS5036-20, 2000# x 24LC, Like New, electric [397421]

0U3003   ULTRASONIC CLEANER
  BLACKSTONE-NEY AQ-@-1460-SPL, 2-tanks 60x18x36 ea, multi frequency 40-72-104khz [403716]
  Crest OC4-1014HE, 10"x14"x10", W/R/R/D, Closed Loop, Ultrasonic cleaning system [404436]
  CREST OC6-1826-HE, 2008, 6-Stn, 18x26"x18"d tanks, W-W-R-R-D-D, robot transfer [404001]
  Crest Ultrasonic Vapor Degreaser/ multi sump, automated, 12x18x12" tank [398667]
  CREST 8-station w load / unload, 29x20, 4-ultrasonic positions, Rigibot transfer [403639]
  Crest Ultrasonic OC4-1218-HE, 2000, 12x18x10", 4-stn, 3-Heated/rotating baskets [401047]
  UCM, 2008, Large 10-Tank Ultrasonic Cleaning/PVD Coating, Passivation, XLNT Cond [399566]

0V0255   VACUUM CLEANERS
  Spencer PA-507A, Tubular Bag Separator, Portable Industravac, 7-1/2 HP, 250 CFM [404440]

0V2753   VIBRATORS, VIBRATORY FINISHERS
  Sweco FMD-2.5LR, 1988, 2.5 cu. ft., w/ Internal Parts Seperator [400979]
  2.7 CuFt TIPTON EFF-105SA, 1996, Semi-Automatic, separation mechanism [398308]

0V4750   VISES
6"Opn, Kurt Vise [338888]
6"Opn, Kurt Vise [338889]
6"Opn, Kurt Vise [338890]

0W0360   WASHERS (INDIVIDUAL BATCH)
  BETTER ENGINEERING FRD-4000 Turntable Washer; "Purifier Series"; W-R-D, like New [403986]
  Crest COC5B-2326, 7 Stn, 11"x11"x20", L/W/R/R/R/D, Rigibot, rotation & basket [401080]
  Crest Ultrasonic COC6-1218, 6 Stations, 10" x 14" x 10" (8" Liquid Depth) [401061]
  CREST OC6-1826-HE, 2008, 6-Stn, 18x26"x18"d tanks, W-W-R-R-D-D, robot transfer [404005]
  Crest Ultrasonic Enclosed Vapor Degreaser/ multi sump, automated, 12x18x12" tank [397485]
  Crest Ultrasonic OC4-1218-HE, 2000, 12x18x10", 4-stn, 3-Heated/rotating tanks [401048]
  35" x 19" Ransohoff Washmaster CW-35W/R [404526]
  TASC MASTER, No. ECS, 30 Gal, Stainless Steel, Parts Washer [344485]

0W0414   WASHERS, PRESSURE, HOT, GAS
  3000 PSI LANDA VNG 4-3000, 275 deg, 3.5 gpm, Natural gas, 220V, XLNT [400320]

0W0760   WATER JET CUTTING, CNC
  2002, CALYPSO, No. SHARK, 6 x 12 [399311]
  FLOW, No. 713633-1, 2008, Dynamic Cutting, Hopper [399314]
  FLOW, No. 713644, 2005, 30 HP Pump, 55,000 PSI, Dynamic Cutting Head [395945]
  FLOW, No. FLYING BRIDGE, 2001, 4' x 8', Flow 6.7 software, [398168]
  FLOW, No. IFB 6012, 2005, Hopper, Flowmaster PC Control [399316]
  Flow M3B 4020, 2014, 5 axis head, Flowteach Control [402522]
  Flow Mach 3 4020B, 2013, Chiller, Dynamic Cutting, Abrasive Hopper [404241]
  Flow Mach 2 1313B, 2012, 50" x 50", 60,000 PSI [402681]
  OMAX, No. 80X-2, 2013, 6' x 26', 5-Axis, 60k PSI, Solid Removal, [403543]
  TECHNI WATERJET, i510, 12/2014, 5'x10', 55,000psi, crash sensor,submerge cutting [399451]
  WARDJET, No. ZX-3043-5, 2015, 5 Axis Head & 3 Axis Head, 10' x 14', 60k PSI [403541]

0W0870   WATER TREATMENT EQUIPMENT
  CREST, No. CLWS-3-STD, 2007 Closed Loop water conservation System [404558]

0W2287   WELDERS (Miscellaneous)
LINCOLN, No. 350, [400166]
MILLER, No. TIG WELDER, [400739]

0W3752   WELDING POSITIONERS
  2000 Lb., KOIKE ARONSON, No. HD20A-PTVR5, 1995, [341814]
JMT offers a series of Welding Positioners, Ask for your quote, Today! [396267]

0W9003   WRAPPERS
  Lantech Q300 Stretch Wrapper, 80" x 20", 35 Loads Per Hour, 65" Turntable [404091]

0Z9991   MISCELLANEOUS
  Haas air Manifold [396831]
  Haas Wire Track Cover [396836]
  Haas 45 amp, Spindle Amps [396837]
  Haas air Manifold [396924]
  Haas air Manifold [396925]
  Haas air Manifold [396926]
Haas Spindle Break Resistors [396936]
  Haas Wire Track Cover [396943]
  Haas 45 amp, Spindle Amps [396946]
  Haas Fans [396954]
  Haas Fans [396955]
  Haas Fans [396956]
  Haas Wire Track Cover [397461]
  Haas Wire Track Cover [397462]
  Haas Wire Track Cover [397463]
  (3) Metal Test Frame Tables, 24" x 36" [404434]

Please complete the form below so we have accurate contact information to give your request the consideration it deserves. At the minimum, we need company name, your name, and your email address.

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?

Please enter text from above:

RETURN