Click on picture below for larger version

Click the link below to view a video demonstration of this machine
http://www.youtube.com/watch?v=jhSmtK2QcPw

  Chiron Magnum Vertical CNC Machining Center with NC Swivel Head
  **See Attached PDF for Full as-shipped specifications**

  Machine is Comparable to Willemin (Mill/Turn)
  Column Moving machining center with Fixed Table

  CAN BE SET UP FOR BAR FEEDING

CNC Control:                             
  Fanuc 18iMB5 5-axis CNC Control simultaneous machining (details below)

Motor at 100%:                           9.4 HP (7kW)
Motor at 25%:                            18.8HP (14kW) 
Main Spindle Speeds:                     0-15,000 RPM
Turning Spindle speeds:                  15 - 8,000 RPM *
*Barfeed Interface included (originally interfaced for an LNS bar feed)

NC Swivel Head:                          -20 / +115 deg
  Rapid traverse:                        60 RPM
  Increments:                            0.0001 deg
  with direct measuring system:          +/- 5"
  Swivel Head Speed:                     0.5 seconds to swivel from 0-90deg

Travels:
  X-axis:                                450mm (17.7")
  Y-axis:                                270mm (10.6")
  Z-AXIS:                                310MM (12.2")

Drilling capacity in steel 60:           0.47" (12mm)
Tapping capacity:                        0.31" (M8)
Milling capacity in steel 60:            1.893 ci/min  (30 cm3/min)

Automatic Tool Changer:                  40 tools
Tool Shank:                              HSK-A 40 DIN 69893
Max tool Dia:                            1.97"(adj. magazine pos are full)
Max tool Dia:                            3.94"(adj. magazine position open)
Tool length:                             6.3" (160mm)
Max tool weight:                         2.6 lbs
Tool Change time:                        0.8 sec
Chip-to-chip time:                       1.9 sec

Lathe spindle capacity (water cooled):   32mm (1.25")
Motor:                                   4kW @ 100% / 8.5kW @ 15%
Spindle speeds:                          15-8,000 rpm
with direct measuring system and pneumatic clamping 
Collet Chuck 12kN with integrated pneumatic actuation

NC-feeding unit as bar feeder
  rapid traver:                          60m/min
  stroke:                                460mm, depending on fixture

Fixed Table with chip pan 
  clamping sur:                          30.3" x 11.4" (770 x 290 MM)
  with thread and locating hole grids:   M16 x diameter 15 H7 x 50mm
Table Load Cap:                          1100 lbs (500kg)


  Fanuc 18iMB5 5-axis simultaneous CNC Control
  A-1 Nano High-Speed Contouring
  32 tool off-sets
  Macro B Sub-routines
  3-D interpolation/helical interpolation
  Circular interpolation (360 deg)
  Rigid Tapping
  Spindle Orientation
  memorey capacity: 256KB
  Drilling Cycles G81 - G89
  Absolute pathe measuring sytem
  M- & T-functions
  Look ahead
  Simultaneous prorogramming
  Auto-corner override
  99 tool offsets
  Cutter radius - contour compensation
  48 zero shifts
  metric/inch
  S-analogue
  Oriented spindle stop
  Slot for PCMCIA Memory Card
  Interface RS232C
  Ethernet connection RJ45 
  Machine diagnosis
  High speed skip and macro common variables
  Barfeed Capable
  Laser Control
  Prepped for Mist Collector
  Hydraulics
  Fixure wash with Flow Control
  Chip Conveyor
  40 Tools

Spindle Hours
Machine is in near new condition
Note: 15,000 RPM Milling spindle option included
Originally interfaced for an LNS Bar Feeder, interface included

Machine:  108" x 72" x 95" 7,500 lbs
Chip Conveyor: 84" x 34" x 30" 1,500 lbs
(2) Pallets w/misc: 48" x 48" x 50" 500 lbs each

RETURN to listing display       RETURN to our home page